GM400.A10A102 SSI Absolute Encoder Custom Replacement Solution
For the GM400.A10A102 model, we provide a full replacement solution that replicates the performance and interface of the original Baumer encoder. Each unit is custom-engineered for precise compatibility, while our streamlined process guarantees delivery in 10–15 working days, saving valuable time for integrators and end users.
With features such as multiturn capability, SSI communication, and robust resistance to magnetic interference, the GM400.A10A102 is suitable for renewable energy applications and industrial automation lines. It supports accurate zero-point adjustment and directional input, ensuring adaptability to different control systems.
Replacement model real product photos available.
Technical Data
Electrical Ratings
| Parameter | Values |
|---|---|
| Voltage supply | 10…30 VDC5 VDC ±10 % |
| Reverse polarity protection | Yes (10…30 VDC) / No (5 VDC) |
| Consumption w/o load | ≤50 mA (24 VDC)≤80 mA (5 VDC) |
| Initializing time typ. | 20 ms after power on |
| Interface | SSIIncremental A 90° B (optional) |
| Function | Multiturn |
| Steps per revolution | ≤16384 / 14 bit |
| Number of revolutions | ≤65536 / 16 bit |
| Absolute accuracy | ±0.025° |
| Sensing method | Optical |
| Code | Gray or binary |
| Code sequence | CW/CCW coded by connection |
| Inputs | SSI clock; Control signals UP/DOWN inv. and zero; SSI data outputs RS422 |
| Output stages | Diagnostic: 1024, 2048 pulses + invertedIncremental output: 512, 1024, 2048 push-pull |
| Interference immunity | EN 61000-6-2 |
| Emitted interference | EN 61000-6-4 |
| Diagnostic function | Self-diagnosis; Multiturn sensing |
| Approval | UL approval / E63076 |
Mechanical Design
| Parameter | Values |
|---|---|
| Size (flange) | ∅58 mm |
| Optional |
|---|
| Stainless steel design |
| Corrosion protection for offshore applications |
| Parameter Category | Values |
|---|---|
| Shaft type | α10 design solid shaft |
| Flange | Clamping flange |
| Protection EN 60529 | IP 54 (without shaft seal)IP 65 (with shaft seal) |
| Operating speed | ≤10000 rpm (mechanical)≤6000 rpm (electric) |
| Angular acceleration | ≤25000 rad/s² (UB = 0 VDC)≤25000 rad/s² (UB = 10…30 VDC, 5 VDC) |
| Starting torque | ≤0.015 Nm (+25 °C, IP 54)≤0.03 Nm (+25 °C, IP 65) |
| Rotor moment of inertia | 20 g·cm² |
| Admitted shaft load | ≤20 N axial≤40 N radial |
| Material | Housing: aluminiumFlange: aluminium |
| Operating temperature | -25…+85 °C-40…+85 °C (optional) |
| Relative humidity | 95 % non-condensing |
| Resistance | EN 60068-2-6Vibration ≤0.75 mm - 10 - 58 Hz, 10 g - 58 - 2000 HzEN 60068-2-27Shock 200 g, 6 ms |
| Weight approx. | 400 g |
| Connection | Connector M23, 12-pinConnector M12, 8-pinCable 1 m |
Disclaimer:
All content on this site is original unless otherwise noted. Copying, collecting, or publishing any material without our permission is prohibited. If any content infringes on copyright, please contact us.
