We are able to provide a reliable replacement solution for the encoder model ATM60-P1H13X13. This alternative is designed to meet the same functional requirements as the original product and ensures compatibility in industrial applications. Our replacement encoders are produced within a short lead time of 10 working days, allowing us to support customers with fast delivery and to maintain the continuity of their production lines. This solution is particularly valuable in situations where original parts are difficult to obtain or delayed in the supply chain.
Our replacement encoders have already been validated by customers across different regions and industries. They have gained strong recognition in South America, Southeast Asia, Russia, and Indonesia, where users require both dependable performance and timely supply. For discontinued encoders or models that are hard to source, we can also offer customized, non-standard designs tailored to specific technical requirements. This capability provides flexibility and helps customers overcome procurement challenges without compromising operational stability.
Replacement solution image display.
Technical Datasheet
Performance
| Parameter | Details |
|---|---|
| Number of steps per revolution (max. resolution) | 8,192 (13 bit) |
| Number of revolutions | 8,192 (13 bit) |
| Max. resolution (number of steps per revolution × number of revolutions) | 13 bit × 13 bit (8,192 × 8,192) |
| Measuring step | 0.043° |
| Error limits G | ± 0.25° ¹） |
| Repeatability standard deviation σᵣ | 0.1° ²） |
Interfaces
| Parameter | Details |
|---|---|
| Communication interface | PROFIBUS DP |
| Communication interface detail | DPV0 |
| Data protocol | Profile for encoders (07hex) - Class 2 |
| Address setting | 0 ... 127, DIP switches or protocol |
| Data transmission rate (baud rate) | 9.6 kBaud ... 12 MBaud, automatic detection |
| Initialization time | 1.250 ms ¹） |
| Position forming time | 0.25 ms |
| Status information | LED green (operation), LED red (bus activity) |
| Bus termination | DIP switch ²） |
Electronics
| Parameter | Details |
|---|---|
| Connection type | Bus adapter ¹） |
| Supply voltage | 10 ... 32 V |
| Power consumption | ≤ 2 W (without load) |
| Reverse polarity protection | ✔️ |
Mechanics
| Parameter | Details |
|---|---|
| Mechanical design | Solid shaft, Servo flange |
| Shaft diameter | 6 mm |
| Shaft length | 10 mm |
| Weight | 0.59 kg ¹） |
| Shaft material | Stainless steel |
| Flange material | Aluminum |
| Start up torque | 2.5 Ncm (+20 °C, with shaft seal)0.5 Ncm (+20 °C, without shaft seal) ²） |
| Operating torque | 1.8 Ncm (+20 °C, with shaft seal)0.3 Ncm (+20 °C, without shaft seal) ²） |
| Permissible shaft loading | 300 N (radial)50 N (axial) |
| Operating speed | 6,000 min⁻¹ ³） |
| Moment of inertia of the rotor | 35 g·m² |
| Bearing lifetime | 3.6 × 10⁶ revolutions |
| Angular acceleration | ≤ 500,000 rad/s² |
Ambient data
| Parameter | Details |
|---|---|
| EMC | According to EN 61000 - 6 - 2 and EN 61000 - 6 - 3 |
| Enclosure rating | IP67, with shaft seal (IEC 60529) ¹IP43, without shaft seal, on encoder flange not sealed (IEC 60529) ¹IP66, without shaft seal, on encoder flange sealed (IEC 60529) ¹ |
| Permissible relative humidity | 98 % |
| Operating temperature range | -20 °C … +85 °C |
| Storage temperature range | -40 °C … +100 °C, without package |
| Resistance to shocks | 100 g, 6 ms (EN 60068 - 2 - 27) |
| Resistance to vibration | 20 g, 10 Hz … 2.000 Hz (EN 60068 - 2 - 6) |
