We offer a fully customized 1:1 replacement solution for the C-FG40KK-1024G-90G-NG-S encoder, designed specifically to resolve sourcing difficulties and legacy model unavailability. This tailored approach follows the exact mechanical and electrical specifications of the original encoder, ensuring that every mounting detail, shaft dimension, output characteristic, and electrical connection is reproduced accurately. Because of this one-to-one engineering, the replacement unit can be installed immediately without modification, providing a seamless transition for users who need to maintain existing systems without redesigning supporting machinery or control interfaces.
Since the introduction of this replacement program, customers from numerous international markets have shown strong interest and trust in our customized encoder manufacturing. End users across the Middle East, Russia, Indonesia, Southeast Asia, Brazil, and Ukraine have commissioned non-standard builds to solve operational challenges caused by discontinued encoders. The consistently positive feedback is largely driven by the performance stability of our products and our ability to maintain a practical 15-working-day production cycle, which helps reduce downtime and ensures timely equipment restoration in demanding industrial environments.
Replacement solution image
Technical data
| Parameter | Value |
|---|---|
| Pulse rates | |
| Standard pulse rates | 500, 600, 1000, 1024, 1200, 2000, 2048, 2400, 2500 |
| Special pulse rates | 4000, 4096, 4800, 5000, 8192, 10000, 12000, 16000, 16384, 20000, 25000, 40000, 50000 (further pulse rates according to customer specification) |
| Connection data | |
| Supply voltage | 12 V … 30 V DC (optional: 5 V DC) For UL and CSA Class 2 supplied |
| No load-current | approx. 50 mA at 24 V |
| Outputs | Current limited, short-circuit proof push-pull line driver with integrated impedance adaptation for 30 to 140 Ω lines |
| Pulse height (HTL) | approx. as supply voltage, output saturation voltage < 0.4 V at Iₗ 30 mA |
| Output current | max. 150 mA at 24 V (observe derating) |
| Internal resistance | 75 Ω bei 24 V |
| Slew rate | 200 V/μs with C_L 100 pF |
| Duty cycle | 1:1 ± 3 % for standard pulse rates 1:1 ± 5 % for special pulse rates up to 25000 pulses |
| Square wave displacement 0°, 90° | 90° ± 3 % for standard pulse rates 90° ± 5 % for special pulse rates up to 25000 pulses |
| Max. frequency | 200 kHz, Higher max. frequency on request |
| Special output voltage 5V (TTL) | |
| Pulse height | 5V, RS422-compatible (TIA/EIA-Standard) |
| Supply voltage | 12 … 30 V DC (optional: 5 V DC) For UL and CSA Class 2 supplied |
| Alternative Connection Data (from image(1)_1.png) | |
| Supply voltage | 5 V … 30 V DC For UL and CSA Class 2 supplied |
| No load-current | Approx. 120 mA at 5 V, approx. 50 mA at 24 V |
| Output signals | 2 sinusoidal signals A and B each with inverted signals Reference pulse with inverted signal Signal amplitude 1 V pp / R_L = 120 Ω Error signal and inverted signal Signal amplitude 5V |
| Resolution | 1024 signal periods |
| Duty cycle | 1 ± 0.1 |
| Phase shift A, B | 90° ± 1° |
