A flexible custom replacement solution is available for the CR66-4096G24E02 parallel absolute encoder, developed to address complex industrial replacement requirements. This solution focuses on solving procurement bottlenecks, supply chain disruptions and the operational risks associated with hard-to-find encoder models. By accurately replicating the original product’s mechanical dimensions, shaft configuration, mounting interface and electrical signal layout, the replacement encoder achieves full 1:1 compatibility. Users can install it directly into existing systems without redesigning brackets, rewiring or altering control logic.
This solution has been widely adopted in international markets, including the Middle East, Russia, Indonesia, Brazil, Southeast Asia and Ukraine. Customers consistently report positive feedback due to the product’s stable performance, competitive cost and dependable operational lifespan. Through continuous optimization of production planning and resource management, we have achieved a standard delivery cycle of 15 working days. This short and reliable lead time allows customers to keep their operations running smoothly and respond quickly to urgent equipment replacement needs.
Reference Images
Technical data
| Parameter | Value |
|---|---|
| Resolution | 2 to 4096 positions / 360° |
| Measuring range | 2 to 4096 turns |
| Total number of positions | |
| Measurement position deviation | |
| Output frequency* | 30 kHz max. up to 10 Bit / 360°; 10 kHz max. from 11 Bit |
| Disc coding | Gray code |
| Output code, parallel | Gray or Natural Binary |
| Code sense, serial | CW or CCW (Signal input E2) |
| Logic polarity | Positive |
| Memory circuit | Store or not store, signal input E1 |
| Enable circuit (for bus operation) | Active or inactive, (signal input E1) |
| Sensor system | GaAlAs diodes, photo-transistor array |
| Parallel output circuits | A = Open collector Darlington; B = Open collector, TTL compatible; C = Open emitter Darlington; D = Push-pull, Totem-pole |
| Serial output SSI | Differential data output to RS 422 |
| Clock input SSI | Differential (opto-coupler) for data driver to RS 422 |
| Supply voltage range | +11 V to +26 VDC |
| Supply current | Parallel: 90 mA typ. / 120 mA max.; Serial GSI: 130mA typ. / 160mA max. |
| Operating speed | 3000 rpm max. (continuous); 4000 rpm max. (short period) |
| Angular acceleration | 10° rad/s² max. |
| Inertial mass of rotor | ≤ 5 Ncm (8 Ncm - CR 66) |
| Wind-up torque | ≤ 1 Nm (4 Ncm - CR 66) |
| Permissible axial and radial shaft load | 250 N max. |
| Bearing life expectancy | 10⁹ revolutions |
| Operating temperature range | -20°C to +60°C |
| Storage temperature range | -25°C to +70°C |
| Permissible rel. humidity | 85% without condensation |
| Resistance to shock | 200 m/s², 11 ms (DIN IEC 68) |
| Resistance to vibration | 5 Hz..1000 Hz; 100 m/s² (DIN IEC 68) |
