The CR105-1024R19C01 is available through our custom replacement service, offering a fully engineered 1:1 parallel absolute encoder solution. This product is manufactured using a non-standard customization process that strictly follows the original encoder’s mechanical and electrical characteristics. The goal is to solve practical issues such as difficult purchasing, discontinued supply or urgent replacement needs. Every critical detail, including installation dimensions, shaft fit, connector type and signal output, is carefully matched so that the encoder can be installed directly into existing systems without any structural or electrical modifications.
This replacement encoder has already been adopted by customers in many international markets, including the Middle East, Russia, Indonesia, Brazil, Southeast Asia and Ukraine. Its stable performance in harsh industrial environments, combined with economic cost advantages, has earned strong customer satisfaction. By standardizing and optimizing our production process, we have achieved a stable lead time of 15 working days, allowing customers to plan maintenance more efficiently and reduce operational risks caused by unexpected equipment failure.
Reference Images
Technical data
| Parameter | Value |
|---|---|
| Resolution | 2 to 4096 positions / 360° |
| Measuring range | 2 to 4096 turns |
| Total number of positions | |
| Measurement position deviation | |
| Output frequency* | 30 kHz max. up to 10 Bit / 360°; 10 kHz max. from 11 Bit |
| Disc coding | Gray code |
| Output code, parallel | Gray or Natural Binary |
| Code sense, serial | CW or CCW (Signal input E2) |
| Logic polarity | Positive |
| Memory circuit | Store or not store, signal input E1 |
| Enable circuit (for bus operation) | Active or inactive, (signal input E1) |
| Sensor system | GaAlAs diodes, photo-transistor array |
| Parallel output circuits | A = Open collector Darlington; B = Open collector, TTL compatible; C = Open emitter Darlington; D = Push-pull, Totem-pole |
| Serial output SSI | Differential data output to RS 422 |
| Clock input SSI | Differential (opto-coupler) for data driver to RS 422 |
| Supply voltage range | +11 V to +26 VDC |
| Supply current | Parallel: 90 mA typ. / 120 mA max.; Serial GSI: 130mA typ. / 160mA max. |
| Operating speed | 3000 rpm max. (continuous); 4000 rpm max. (short period) |
| Angular acceleration | 10° rad/s² max. |
| Inertial mass of rotor | ≤ 5 Ncm (8 Ncm - CR 66) |
| Wind-up torque | ≤ 1 Nm (4 Ncm - CR 66) |
| Permissible axial and radial shaft load | 250 N max. |
| Bearing life expectancy | 10⁹ revolutions |
| Operating temperature range | -20°C to +60°C |
| Storage temperature range | -25°C to +70°C |
| Permissible rel. humidity | 85% without condensation |
| Resistance to shock | 200 m/s², 11 ms (DIN IEC 68) |
| Resistance to vibration | 5 Hz..1000 Hz; 100 m/s² (DIN IEC 68) |
