We offer a dedicated 1:1 replacement solution for the CE58-1024GA04 parallel absolute encoder, designed through non-standard customized engineering methods. This solution is developed to support equipment facing sourcing challenges or migration from legacy encoder models. Every mechanical fitting point and electrical parameter is carefully replicated to match the original design, allowing direct installation without modifying the control system or wiring architecture. This makes it an ideal option for maintenance upgrades and spare parts stocking strategies.
Since the introduction of this replacement solution, it has been successfully adopted by customers across a wide range of global markets, including the Middle East, Russia, Indonesia, Brazil, Southeast Asia, and Ukraine. Clients value the stable signal transmission, strong resistance to industrial interference, and reliable operational consistency. With a production lead time optimized to around 15 working days, this solution helps customers significantly shorten downtime and maintain uninterrupted production processes, which has earned widespread positive feedback.
Reference Images
Technical data
| Sensor system | GaAlAs diode, photo-transistor array |
| Parallel outputs circuits A | Open collector Darlington |
| Parallel outputs circuits B | Open collector, TTL compatible |
| Parallel outputs circuits C | Open emitter Darlington |
| Supply voltage range | +10.5 V to 26.5 VDC |
| Supply current | 50 mA |
| Output frequency | 30 kHz max. |
| Measurement position deviation | 10° |
| Disc coding | 10 bit |
| Code sense | Gray code or Gray-Excess (CW or CCW selectable by connecting MSB or LSB) |
| Enable circuit (for bus operation) | Active or inactive (Signal input ET) |
| Operating speed (continuous) | 3000 rpm max. |
| Operating speed (short period) | 4000 rpm max. |
| Inertial mass of rotor | 35 gcm² |
| Operating torque | ≤ 1 Ncm |
| Wind-up torque | ≤ 0.2 Ncm |
| Permissible axial and radial shaft load | 100 N |
| Bearing life expectancy | 10⁸ revolutions |
| Operating temperature range | -5°C to +60°C |
| Storage temperature range | –25°C to +70°C |
| Resistance to shock | 200 m/s², 11 ms |
| Resistance to vibration | 5 Hz ... 1000 Hz; 100 m/s² |
| Protection | IP 65 when used with the supplied connector cover |
| Mass | 240 g |
