Our 1:1 parallel absolute encoder replacement for the CRF66-4096G4096A13 preserves the original 4096×4096 multi-turn resolution and parallel output interface. The mechanical dimensions, housing, flange, shaft, and connector layout are fully replicated to allow seamless integration into existing systems. This solution is ideal for clients requiring a dependable, high-precision replacement where the original encoder is difficult to source. Standard production and delivery time is 10–15 working days.
This encoder has been successfully deployed in Southeast Asia, the Middle East, Brazil, Russia, and Ukraine. Its high accuracy, robust construction, and stable multi-turn performance make it a preferred choice for CNC machinery, automated assembly lines, wind turbine systems, and other industrial automation applications where consistent absolute feedback is critical.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
