Our 1:1 parallel absolute encoder replacement for the CRF66-4096G4096A01 preserves all original mechanical and electrical features, including its 4096×4096 resolution and parallel output configuration. The flange, shaft interface, housing, and connector layout are fully replicated, ensuring direct installation without modification. This replacement is an ideal solution for clients who require reliable absolute feedback in systems where sourcing the original encoder is difficult. Lead time is 10–15 working days.
This replacement has been successfully applied in Southeast Asia, the Middle East, Brazil, Russia, and Ukraine. Its precise multi-turn tracking, robust design, and stable performance have earned positive customer feedback. It is suitable for CNC machinery, automated production lines, wind energy systems, and heavy-duty material-handling applications.
Reference Images
Electrical data
| Parameter | Value |
| Electrical data (Valid for all versions unless otherwise stated) | |
| Sensor system | GaAlAs diode, photo-transistor array, precision comparator |
| Parallel output circuits | A = Open collector, C = Darlington, D = Push pull |
| Serial outputs | Differential output to RS422 |
| SS/ ASA | Differential (opto-coupler) for data driver RS 422 |
| Parity bit | Check bit (not to RS - 22 Bit) |
| Error bit output | Data Bit (parallel and SS/ 32 Bit only) |
| Enable circuit for bus operation | Active or inactive |
| Multifunctional inputs (MFP) | Signal input 6 |
| Memory circuit (latch) | Through MFP |
| Code sense | CW or CCW |
| Supply voltage range | 11 to 26 VDC |
| Supply current | 80 mA typ. / 120 mA max. |
| Data rate | 1 to 3 kHz, depending on programming (parallel interface only) |
| Measurement position deviation | ≤ ± 238' (for 4096 pos. / 360°) |
| Disc coding | Gray code |
| Setting cycles EEPROM | ≤ 10^6 |
| Mechanical data | |
| Operating speed | 3000 rpm max. (continuous), 4000 rpm max. (short period) |
| Operating torque | 5 Ncm min. (at 1000 rpm) |
| Wind-up torque | ≤ 10 Ncm (4 Ncm - CRF 66) |
| Angular acceleration | 10^6 rad/s^2 max. |
| Inertial mass of rotor | 50 gcm^2 |
| Permissible axial and radial shift load | 250 N max. |
| Bearing life expectancy | 10^6 turns |
