30-3601_A-2048 Incremental Encoder Custom Replacement Model
Custom Replacement Solution
We provide a custom replacement version of the 30-3601_A-2048 encoder with flexibility for non-standard options such as shaft design, mounting flange, and pulse output type. These tailor-made encoders are produced efficiently and delivered in approximately 10 working days, offering clients a rapid and reliable alternative.
Product Review
The 30-3601_A-2048 incremental encoder is suitable for applications requiring high-precision incremental feedback. With 2048 PPR output, it ensures accurate position measurement for automation, robotics, and process control systems. Its rugged steel housing and reinforced shaft resist radial and axial loads, and the IP65 enclosure protects against dust and water, making it highly reliable in demanding industrial environments.
البيانات الفنية
| Specification Category | المعلمة | التفاصيل |
|---|---|---|
| General specifications | Pulse count | max. 5000 |
| Electrical specifications | Operating voltage (UG) | 10 ... 30 فولت تيار مستمر |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Category | المعلمة | التفاصيل |
|---|---|---|
| الاتصال | Connector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Standard conformity | Degree of protection | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/أ1:2011 | |
| Noise immunity | إن 61000-6-2:2005 | |
| Approvals and certificates | اعتماد UL | cULus Listed, General Purpose, Class 2 Power Source |
الظروف المحيطة
| المعلمة | التفاصيل |
|---|---|
| درجة حرارة التشغيل | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Storage temperature | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
المواصفات الميكانيكية
| المعلمة | التفاصيل |
|---|---|
| المواد | Combination 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| القداس | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Rotational speed | max. 6000 min⁻¹ |
| عزم القصور الذاتي | < 270 g·m² |
| بدء عزم الدوران | ≤ 5 N·cm |
| Shaft load | Axial: 60 NRadial: 80 N |
