30-3601_A-2000 Incremental Encoder Custom Replacement Model
Custom Replacement Solution
We offer a custom replacement solution for the 30-3601_A-2000 incremental encoder, providing non-standard adaptations such as modified shaft length, flange type, and output signal configuration. These tailored units are designed to meet the unique requirements of your application while maintaining the original performance specifications. Manufactured in-house with precision, these encoders are available within approximately 10 working days, allowing for rapid replacement and minimizing operational downtime.
Product Review
The 30-3601_A-2000 incremental encoder delivers 2000 PPR output for precise motion control in industrial automation and machinery. Its robust steel housing and reinforced shaft provide resistance to radial and axial loads, while IP65-rated protection ensures reliability in dusty, wet, or vibrating environments. This makes it suitable for conveyors, packaging machinery, and other automated industrial systems where consistent and accurate incremental feedback is critical.
البيانات الفنية
| Specification Category | المعلمة | التفاصيل |
|---|---|---|
| General specifications | Pulse count | max. 5000 |
| Electrical specifications | Operating voltage (UG) | 10 ... 30 فولت تيار مستمر |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Category | المعلمة | التفاصيل |
|---|---|---|
| الاتصال | Connector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Standard conformity | Degree of protection | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/أ1:2011 | |
| Noise immunity | إن 61000-6-2:2005 | |
| Approvals and certificates | اعتماد UL | cULus Listed, General Purpose, Class 2 Power Source |
الظروف المحيطة
| المعلمة | التفاصيل |
|---|---|
| درجة حرارة التشغيل | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Storage temperature | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
المواصفات الميكانيكية
| المعلمة | التفاصيل |
|---|---|
| المواد | Combination 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| القداس | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Rotational speed | max. 6000 min⁻¹ |
| عزم القصور الذاتي | < 270 g·m² |
| بدء عزم الدوران | ≤ 5 N·cm |
| Shaft load | Axial: 60 NRadial: 80 N |
