30-3601_A-360 Incremental Encoder Custom Replacement Model
Custom Replacement Solution
We provide a custom replacement variant of the 30-3601_A-360 encoder, supporting non-standard modifications such as shaft diameter, flange type, and signal output configuration. Produced efficiently in-house, these units can be delivered within approximately 10 working days, minimizing production downtime and ensuring continuity.
Product Review
The 30-3601_A-360 incremental encoder provides 360 PPR output for accurate incremental feedback in industrial automation. Its robust steel housing and reinforced shaft resist mechanical stress, while IP65 protection ensures reliability in challenging environments. The encoder is suitable for conveyor systems, packaging machinery, and automated equipment.
البيانات الفنية
| Specification Category | المعلمة | التفاصيل |
|---|---|---|
| General specifications | Pulse count | max. 5000 |
| Electrical specifications | Operating voltage (UG) | 10 ... 30 فولت تيار مستمر |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Category | المعلمة | التفاصيل |
|---|---|---|
| الاتصال | Connector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Standard conformity | Degree of protection | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/أ1:2011 | |
| Noise immunity | إن 61000-6-2:2005 | |
| Approvals and certificates | اعتماد UL | cULus Listed, General Purpose, Class 2 Power Source |
الظروف المحيطة
| المعلمة | التفاصيل |
|---|---|
| درجة حرارة التشغيل | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Storage temperature | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
المواصفات الميكانيكية
| المعلمة | التفاصيل |
|---|---|
| المواد | Combination 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| القداس | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Rotational speed | max. 6000 min⁻¹ |
| عزم القصور الذاتي | < 270 g·m² |
| بدء عزم الدوران | ≤ 5 N·cm |
| Shaft load | Axial: 60 NRadial: 80 N |
إخلاء المسؤولية:
جميع محتويات هذا الموقع أصلية ما لم يذكر خلاف ذلك. يحظر نسخ أو جمع أو نشر أي مواد دون إذن منا. إذا كان أي محتوى ينتهك حقوق الطبع والنشر، يرجى الاتصال بنا.
