30-3601_A-600 Incremental Encoder Custom Replacement Model
Custom Replacement Solution
We offer a custom replacement version of the 30-3601_A-600 encoder, supporting non-standard modifications such as shaft type, flange design, and electrical output configuration. Manufactured in-house with precision, these encoders are delivered within approximately 10 working days, providing a fast and reliable solution for continuous operation. This service ensures minimal downtime and allows clients to adapt the encoder to specific requirements without compromising performance.
Product Review
The 30-3601_A-600 incremental encoder provides 600 PPR output for precise motion control in industrial automation. Its steel housing and reinforced shaft ensure durability under radial and axial loads, while IP65-rated protection guards against dust, moisture, and vibrations. This encoder is suitable for conveyor systems, packaging machinery, and robotics, delivering stable and accurate incremental feedback for various industrial applications.
البيانات الفنية
| Specification Category | المعلمة | التفاصيل |
|---|---|---|
| General specifications | Pulse count | max. 5000 |
| Electrical specifications | Operating voltage (UG) | 10 ... 30 فولت تيار مستمر |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Category | المعلمة | التفاصيل |
|---|---|---|
| الاتصال | Connector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Standard conformity | Degree of protection | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/أ1:2011 | |
| Noise immunity | إن 61000-6-2:2005 | |
| Approvals and certificates | اعتماد UL | cULus Listed, General Purpose, Class 2 Power Source |
الظروف المحيطة
| المعلمة | التفاصيل |
|---|---|
| درجة حرارة التشغيل | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Storage temperature | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
المواصفات الميكانيكية
| المعلمة | التفاصيل |
|---|---|
| المواد | Combination 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| القداس | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Rotational speed | max. 6000 min⁻¹ |
| عزم القصور الذاتي | < 270 g·m² |
| بدء عزم الدوران | ≤ 5 N·cm |
| Shaft load | Axial: 60 NRadial: 80 N |
