The FGH6K-1200G-90G-NG-J/50P encoder has been trusted in the field of heavy-duty motion control for years. As sourcing the original model becomes increasingly difficult, we now provide a tailor-made incremental encoder replacement built according to exact technical parameters. Our customized solution is designed to match the original interface and output specifications, allowing a direct retrofit for existing equipment. With short delivery time and guaranteed compatibility, users can restore their system functionality quickly and reliably.
This model has been widely applied in steel production lines, conveyor drives, and automated process control systems. The encoder offers excellent performance stability and high-resolution output, essential for speed and position feedback in demanding industrial setups. Our replacement version follows the same design philosophy and integrates updated components to improve long-term durability and temperature tolerance in tough working environments.
Replacement solution image.
Technical Parameters Table
1. Electrical and mechanical data
| Item | Value |
|---|---|
| Pulse | 1024, 2000 |
| Preferred pulse rates (nickel disks) | 256, 600, 1000, 1200, 1920, 2048, 2500, 4000, 4096, 5000 |
| Pulse rates available | - |
2. Connection data
| Item | Value |
|---|---|
| Supply voltage | 12 … 30 VDC (Option: 5 VDC) |
| No-load-current | approx. 100 mA at 30 V (without Option) |
| Outputs | Differential-driver, resistant to sustained short-circuit, current limited, short-circuit. |
| Pulse height (HTL) | approx. as supply voltage |
| Internal resistance | 50 Ω per output |
| Pulse height (TTL) | 5 V to RS 422 |
| Slew rate | 50 V / μs |
| Pulse duty factor | 1:1 ± 5 % |
| Max. frequency | to 50 KHz < 3 %to 150 KHz < 5 %0 to 100 KHz. (to 150 KHz on request) |
3. Encoder temperature ranges
| Item | Value |
|---|---|
| Standard | 0°C … + 70°C |
| Special temperature | -25°C … + 85°C |
4. Special output voltage 5V (TTL)
| Item | Value |
|---|---|
| Pulse height | 5V, RS422 compatible (TIA/EIA - Standard) |
| Supply voltage | 12 … 30 VDC |
5. Protection class (DIN EN 60529)
| Protection class DIN EN 60529 | Sealing | Mechanical speed | Description | Breakaway torque |
|---|---|---|---|---|
| IP 54 | Special seal | ≤ 4000 rpm | Protection against dust and water spray | approx. 30 to 50 Ncm |
| IP 66only drive side | Radial shaft seal | ≤ 1500 rpm | Protection against dust and water spray | approx. 60 Ncm |
| IP 66both sides | Radial shaft seal | ≤ 1100 rpm | Protection against dust and water spray | approx. 70 Ncm |
6. Weight
| Item | Type K | Type KK |
|---|---|---|
| Weight | 6 kg | 6,8 kg |
