30-3601_A-1024 Incremental Encoder Custom Replacement Model
Solución de sustitución personalizada
We provide a custom replacement solution for the 30-3601_A-1024 model, offering tailored configurations to meet specific application requirements. Customers can request adaptations in shaft dimensions, mounting flanges, and pulse output signals while maintaining the original performance standards. These non-standard encoders are produced efficiently and can be delivered within approximately 10 working days, allowing clients to minimize downtime and ensure continuous production.
Revisión del producto
The 30-3601_A-1024 incremental encoder is built for high-reliability industrial applications where mechanical stress and harsh environments are common. Its robust steel housing and reinforced shaft withstand radial loads up to 80 N and axial loads up to 60 N. With 1024 PPR output, it provides precise incremental position feedback suitable for automation systems, conveyor lines, and heavy-duty machinery. The IP65-rated enclosure ensures protection against dust and water, delivering reliable performance in challenging conditions.
Datos técnicos
| Categoría de especificaciones | Parámetro | Detalles |
|---|---|---|
| Especificaciones generales | Pulse count | max. 5000 |
| Especificaciones eléctricas | Operating voltage (UG) | 10 ... 30 V CC |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Categoría | Parámetro | Detalles |
|---|---|---|
| Conexión | Conector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Conformidad con las normas | Grado de protección | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | Aprobación UL | cULus Listed, uso general, fuente de alimentación de clase 2 |
Condiciones ambientales
| Parámetro | Detalles |
|---|---|
| Temperatura de funcionamiento | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Temperatura de almacenamiento | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
Especificaciones mecánicas
| Parámetro | Detalles |
|---|---|
| Material | Combinación 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combinación 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Masa | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Velocidad de rotación | máx. 6000 min-¹ |
| Momento de inercia | < 270 g·m² |
| Par de arranque | ≤ 5 N·cm |
| Carga del eje | Axial: 60 NRadial: 80 N |
