30-3601IA-360 Incremental Encoder Custom Replacement Model
Solución de sustitución personalizada
We provide a custom replacement solution for the 30-3601IA-360 incremental encoder, supporting non-standard shaft and flange configurations and customized output signals. Manufactured in-house with precision, these units are delivered within approximately 10 working days, ensuring a quick replacement process while maintaining operational efficiency. This custom solution allows integration into specialized automation systems with minimal disruption.
Revisión del producto
The 30-3601IA-360 incremental encoder delivers 360 PPR output for accurate incremental feedback in industrial automation. Its steel housing and reinforced shaft withstand mechanical stresses, while the IP65-rated enclosure ensures resistance to dust, moisture, and vibration. The encoder is suitable for robotic assemblies, conveyor lines, and packaging machinery where precise motion feedback is essential.
Datos técnicos
| Categoría de especificaciones | Parámetro | Detalles |
|---|---|---|
| Especificaciones generales | Pulse count | max. 5000 |
| Especificaciones eléctricas | Operating voltage (UG) | 10 ... 30 V CC |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Categoría | Parámetro | Detalles |
|---|---|---|
| Conexión | Conector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Conformidad con las normas | Grado de protección | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | Aprobación UL | cULus Listed, uso general, fuente de alimentación de clase 2 |
Condiciones ambientales
| Parámetro | Detalles |
|---|---|
| Temperatura de funcionamiento | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Temperatura de almacenamiento | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
Especificaciones mecánicas
| Parámetro | Detalles |
|---|---|
| Material | Combinación 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combinación 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Masa | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Velocidad de rotación | máx. 6000 min-¹ |
| Momento de inercia | < 270 g·m² |
| Par de arranque | ≤ 5 N·cm |
| Carga del eje | Axial: 60 NRadial: 80 N |
