30-3601IA-60 Incremental Encoder Custom Replacement Model
Solución de sustitución personalizada
We offer a custom replacement solution for the 30-3601IA-60 incremental encoder, providing non-standard options for shaft type, flange configuration, and output signals. Produced in-house with precision, these encoders are delivered within approximately 10 working days. This solution reduces downtime and ensures reliable replacement for industrial applications requiring specialized components.
Revisión del producto
The 30-3601IA-60 incremental encoder delivers 60 PPR output, suitable for low-resolution motion feedback in industrial automation. Its robust steel housing and reinforced shaft resist radial and axial loads, and the IP65 enclosure ensures protection against dust, moisture, and vibrations. This encoder is ideal for small conveyors, automated machinery, and specialized motion control systems.
Datos técnicos
| Categoría de especificaciones | Parámetro | Detalles |
|---|---|---|
| Especificaciones generales | Pulse count | max. 5000 |
| Especificaciones eléctricas | Operating voltage (UG) | 10 ... 30 V CC |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Categoría | Parámetro | Detalles |
|---|---|---|
| Conexión | Conector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Conformidad con las normas | Grado de protección | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | Aprobación UL | cULus Listed, uso general, fuente de alimentación de clase 2 |
Condiciones ambientales
| Parámetro | Detalles |
|---|---|
| Temperatura de funcionamiento | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Temperatura de almacenamiento | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
Especificaciones mecánicas
| Parámetro | Detalles |
|---|---|
| Material | Combinación 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combinación 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Masa | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Velocidad de rotación | máx. 6000 min-¹ |
| Momento de inercia | < 270 g·m² |
| Par de arranque | ≤ 5 N·cm |
| Carga del eje | Axial: 60 NRadial: 80 N |
