RVI70E-011KAR61N-01024 Explosion-Proof Encoder Custom Replacement Solution
Our company offers a reliable custom replacement for the RVI70E-011KAR61N-01024 explosion-proof encoder. With 1:1 compatibility in installation size and operating parameters, it can directly replace the original unit without the need for design modifications. We maintain a production period of approximately 10 working days, which helps customers reduce downtime and keep production lines running efficiently. Clients from regions such as South America, the Middle East, Russia, and Southeast Asia have already benefited from this solution.
This encoder is engineered with explosion-proof protection, making it suitable for hazardous locations. It features incremental signal output with a resolution of 1024 pulses, offering accurate positioning feedback for industrial systems. Its rugged design ensures resistance to vibration and temperature variations, while its protective enclosure guarantees safe performance in areas prone to explosive risks. By combining safety and precision, it serves industries where both compliance and reliability are essential.
Imagen del modelo de sustitución a continuación.
Datos técnicos
| Categoría de especificaciones | Parámetro | Detalles |
|---|---|---|
| Especificaciones generales | Tipo de detección | muestreo fotoeléctrico |
| Tipo de dispositivo | Incremental rotary encoder | |
| Pulse count | max. 5000 | |
| Parámetros relacionados con la seguridad funcional | MTTFₐ (Mean Time To Failure) | 140 a |
| L₁₀ (Bearing life) | 1.6 E-9 at 3000 rpm | |
| Especificaciones eléctricas | Operating voltage (UB) | 10 … 30 V DC or 5 V DC ± 5% (see "Output circuit" in ordering information) |
| No-load supply current (IB) | max. 60 mA | |
| Output type | push-pull, incremental or RS 422, incremental (see "Output circuit" in ordering information) | |
| Voltage drop (UL) | < 4 V (push-pull, incremental) | |
| Load current | max. per channel 35 mA (push-pull, short-circuit protected, reverse polarity protected)max. per channel 20 mA (RS 422, short-circuit protected, reverse polarity protected) | |
| Output frequency | max. 200 kHz | |
| Rise time | 250 ns | |
| Phase position A to B | 90° ± 18° | |
| Ciclo de trabajo | 1/2 ± 20% | |
| De-energized delay (toff) | 250 ns | |
| Conexión | Cable | ∅10.2 mm, Radox 9 × 0.5 mm² |
| Conformidad con las normas | Grado de protección | DIN EN 60529, IP66DIN EN 60529, IP67 |
| Pruebas climáticas | DIN EN 60068-2-30, no moisture condensation | |
| Emitted interference | EN IEC 61000-6-4:2019 | |
| Noise immunity | EN IEC 61000-6-2:2019 | |
| Resistencia a los golpes | DIN EN 60068-2-27: 100 g, 6 ms | |
| Resistencia a las vibraciones | DIN EN 60068-2-6: 10 g ... 2000 Hz |
Homologaciones y certificados
| Certificación | Detalles |
|---|---|
| IECEx approval | Equipment protection level Gb: IECEx ZLM 14.0003XEquipment protection level Db: IECEx ZLM 14.0003X |
| ATEX approval | Equipment protection level Gb: ZELM 14 ATEX 0619 XEquipment protection level Db: ZELM 14 ATEX 0619 X |
| CCC approval | 2020323414001056 |
| Hazardous Location | 19-AVBO-0390 and 19-AVBO-0391 |
| KCC approval | (not specified) |
Condiciones ambientales
| Parámetro | Detalles |
|---|---|
| Temperatura de funcionamiento | -40 ... 70 °C (-40 ... 158 °F) |
| Temperatura de almacenamiento | -40 ... 70 °C (-40 ... 158 °F) |
Especificaciones mecánicas
| Parámetro | Detalles |
|---|---|
| Material | Combinación 1:housing: anodized aluminumflange: stainless steel 1.4401 / AISI 316shaft: stainless steel 1.4401 / AISI 316Combinación 2 (inox):housing: anodized aluminumflange: stainless steel 1.4401 / AISI 316shaft: stainless steel 1.4401 / AISI 316 |
| Masa | approx. 1300 g (combination 1)approx. 1500 g (combination 2, anodized) |
| Velocidad de rotación | máx. 6000 min-¹ |
| Momento de inercia | 400 g·cm² |
| Par de arranque | < 5 mN·m |
| Carga del eje | Axial: 150 NRadial: 110 N |
General Information
| Item | Detalles |
|---|---|
| Use in hazardous area | see Instruction manuals |
