RVI58X-032K1R61N-02000 Incremental Encoder Custom Replacement Model
Our company provides a stainless-steel replacement for the RVI58X-032K1R61N-02000 incremental encoder. Production is completed within 10–15 working days, ensuring rapid response to procurement needs. The replacement maintains 1:1 dimensional and performance compatibility, allowing seamless integration into existing systems without requiring changes in mounting or wiring configurations. This approach guarantees that customers can restore production efficiency quickly and reliably.
In terms of application, this encoder provides 2000 pulses per revolution, striking a balance between resolution and processing speed. It is widely adopted in conveyor control, speed regulation of motors, and general automation systems where medium-to-high resolution is sufficient. The six-channel incremental outputs make it adaptable to different wiring and controller standards, increasing system flexibility. Built with a stainless-steel housing, the encoder withstands challenging industrial environments while maintaining high signal accuracy. Safety certification for hazardous zones 2 and 22 allows deployment in areas with potential explosive atmospheres, further broadening its industrial usability. As a result, the encoder offers both performance precision and environmental robustness, ensuring consistent reliability over its service life.
Datos técnicos
| Categoría de especificaciones | Parámetro | Detalles |
|---|---|---|
| Especificaciones generales | Tipo de detección | muestreo fotoeléctrico |
| Pulse count | max. 5000 | |
| Parámetros relacionados con la seguridad funcional | MTTFₐ | 140 a |
| L₁₀ | 70 E-9 at 6000 rpm | |
| Cobertura diagnóstica (CD) | 0 % | |
| Especificaciones eléctricas | Operating voltage (UB) | 10 ... 30 V CC |
| No-load supply current (I0) | max. 60 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (Ud) | < 3 V | |
| Load current | max. per channel 40 mA, short-circuit protected (not with UB), reverse polarity protected | |
| Output frequency | max. 200 kHz | |
| Rise time | 400 ns | |
| Conexión | Cable | ∅7.8 mm, 6 x 2 x 0.14 mm², 1 m |
| Conformidad con las normas | Grado de protección | DIN EN 60529, IP64 |
| Pruebas climáticas | DIN EN 60068-2-3, no moisture condensation | |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Resistencia a los golpes | DIN EN 60068-2-27, 100 g, 3 ms | |
| Resistencia a las vibraciones | DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz | |
| Approvals and certificates | Aprobación UL | cULus Listed, uso general, fuente de alimentación de clase 2 |
Condiciones ambientales
| Parámetro | Detalles |
|---|---|
| Temperatura de funcionamiento | Glass disk: -30 … 70 °C (-22 … 158 °F), cable, fixed installationPlastic disk: -30 … 60 °C (-22 … 140 °F), cable, fixed installation |
| Temperatura de almacenamiento | Glass disk: -30 … 70 °C (-22 … 158 °F)Plastic disk: -30 … 70 °C (-22 … 158 °F) |
Especificaciones mecánicas
| Parámetro | Detalles |
|---|---|
| Material | Housing: powder coated aluminumFlange: AluminumShaft: Stainless steel |
| Masa | approx. 350 g |
| Velocidad de rotación | máx. 6000 min-¹ |
| Momento de inercia | ≤ 25 gcm² |
| Par de arranque | ≤ 1.5 Ncm |
| Carga del eje | Axial: 40 NRadial: 60 N |
| Dimensiones | Length: 50.5 mmDiameter: 58 mm |
Data for Hazardous Areas
| Item | Detalles |
|---|---|
| ATEX marking | ① II 3G Ex nA IIB T4 Ga X② II 3D Ex t IIIC T105°C Dc X |
| Certificate | PF 18 CERT 4775 X |
| Directive conformity | Directive 2014/34/EUEN IEC 60079-0:2018, EN 60079-15:2010, EN 60079-31:2014 |
