The PRF13-A1AM0520 wire draw encoder can be replaced with our precision-engineered draw wire displacement sensor, designed to replicate the mechanical and functional characteristics of the original unit. This replacement provides reliable incremental position measurement and stable operation, allowing seamless integration into existing systems. The standard production and delivery time is approximately 10 working days, offering a fast and dependable solution for maintenance or system upgrades.
Featuring a robust cable mechanism and carefully calibrated internal components, this sensor delivers smooth, repeatable measurements and consistent long-term performance. It is suitable for industrial applications including machine positioning, stroke monitoring, and linear motion detection, ensuring accurate and dependable operation even under challenging conditions.
Detailed technical data
Rendimiento
| Rango de medición | 0m...5m |
|---|---|
| Codificador | Incremental encoders |
| Resolución (cable + codificador) | 0.03 mm |
| Repetibilidad | S1 mm |
| Linealidad | <±2mm |
| Histéresis | s 2 mm |
Interfaces
| Interfaz de comunicación | Incremental/TTL/RS-422 |
|---|---|
| Programable/configurable | |
| Factory setting | The built-on DFS60 encoders are programmed to the specified number of lines and interface prior to delivery. The electrical interface (TTL/HTL)and the number of lines (up to max. 10,000 lines) can be set in accordance with customer requirements with our programming devices for DFS60 encoders,which are available separately. |
Electrónica
| Tipo de conexión | Male connector, M23,12-pin,radial |
|---|---|
| Tensión de alimentación | 4.5V...5.5 V |
| Consumo de energía | ≤ 0.7 W (without load) |
Mecánica
| Peso | 3.1 kg |
|---|---|
| Material del cable de medición | Acero trenzado de gran flexibilidad Acero inoxidable 1,4401 V4A |
| Medición del diámetro del alambre | 1,35 mm |
| Peso (hilo de medición) | 7,1 g/m |
| Housing material, wire draw mechanism | Aluminio (anodizado),plástico |
| Fuerza de retorno del muelle | 15 N...20O N |
| Length of wire pulled out per revolution | 334.1 mm |
| Vida útil del mecanismo de trefilado | Typ.1,000,00ccles |
| Longitud real del cable | 5.2m |
| Aceleración del cable | 70m/s2 |
| Velocidad de funcionamiento | 8 m/s |
| Codificador montado | DFS60, DFS60B-S1MA10000,1056866 |
| Mecánico montado | MRA-F130-105D2,6028626 |
Datos ambientales
| EMC | Según EN 61000-6-2 y EN61000-6-3 |
|---|---|
| Clasificación del recinto | IP64, montaje mecánico |
| IP67,Encoder([EC 60529) | |
| Temperatura de funcionamiento | -30°C...+70°C |
