Revisión del producto
En PSM58X-F2AAGR0BN-1416 is designed for precise multiturn feedback in hazardous industrial environments. Its Profibus DP interface supports advanced functions such as extended scaling, preset positions, and speed transfer. The robust mechanical construction and explosion-proof certification make it suitable for challenging applications like oil & gas, chemical processing, and heavy machinery.
Solución de sustitución personalizada
Our custom replacement option for the PSM58X-F2AAGR0BN-1416 guarantees mechanical and electrical compatibility while allowing adaptations to meet unique project requirements. Typical delivery is 15 working days, providing fast access to reliable, safe encoder alternatives.
Datos técnicos
Especificaciones generales
| Parámetro | Valor |
|---|---|
| Tipo de detección | muestreo fotoeléctrico |
| Tipo de dispositivo | Encóder absoluto multivuelta |
| Número de expediente UL | E223176 "For use in NFPA 79 Applications only", if UL marking is marked on the product |
Especificaciones eléctricas
| Parámetro | Valor |
|---|---|
| Operating voltage | 10...30V DC |
| Current consumption | max. 230mA at 10V DC, max. 100mA at 24V DC |
| Time delay before availability | <1000ms |
| Linealidad | ±2 LSB at 16 Bit, +1 LSB at 13 Bit, +0,5 LSB at 12 Bit |
| Código de salida | código binario |
| Counting direction | programmable, cw ascending/descending |
Interface specifications
| Parámetro | Valor |
|---|---|
| Tipo de interfaz | PROFIBUS |
| Resolución | Single turn: up to 16 Bit; Multiturn: 14 Bit; Total: up to 30 Bit |
| Tasa de transferencia | 0.0096...12 MBit/s |
| Conformidad con las normas | Perfil PNO 3.062, RS-485 |
| Terminal compartment | in removable housing cover |
Mechanical specifications
| Parámetro | Valor |
|---|---|
| Material | Housing: powder coated aluminum; Flange: aluminum; Shaft: stainless steel |
| Masa | approx. 600g |
| Velocidad de rotación | máx. 6000 min-¹ |
| Momento de inercia | 30gcm² |
| Par de arranque | ≤3 Ncm |
| Tightening torque | max. 1.8 Nm |
| Angular offset | ±0.9° |
| Axial offset | static: ±0.3mm, dynamic: ±0.1mm |
| Radial offset | static: ±0.5mm, dynamic: ±0.2mm |
Hazardous areas specifications
| Parámetro | Valor |
|---|---|
| ATEX marking | 1 II 3D Ex tc IIIC T120°C Dc X; 1 II 3G Ex nA IIB T4 Gc X |
| Certificate | PF 19 CERT 5194 X |
| Directive conformity | Directive 2014/34/EU; EN 60079-0:2012+A11:2013; EN 60079-15:2010; EN 60079-31:2014 |
Environmental specifications
| Parámetro | Valor |
|---|---|
| Grado de protección | IP64 (shaft side), IP65 (housing side) |
| Temperatura de funcionamiento | -30...55°C (-22...131°F) |
| Temperatura de almacenamiento | -30...70°C (-22...158°F) |
| Resistencia a los golpes | DIN EN 60068-2-27, 100g, 6ms |
| Resistencia a las vibraciones | DIN EN 60068-2-6, 10g, 10...2000Hz |
Descargo de responsabilidad:
Todo el contenido de este sitio es original a menos que se indique lo contrario. Está prohibido copiar, recopilar o publicar cualquier material sin nuestro permiso. Si algún contenido infringe los derechos de autor, póngase en contacto con nosotros.
