Revisión del producto
En PSM58X-F3AAGR0BN-1416 is a multiturn absolute encoder built for precise feedback in hazardous industrial areas. Featuring a rugged 58 mm aluminum housing, stainless-steel shaft, and Profibus DP interface, it provides high-resolution position information and reliable communication with automation systems. Its certified explosion-proof design and robust mechanical performance make it ideal for oil, gas, chemical, and process automation applications.
Solución de sustitución personalizada
We offer a custom replacement for the PSM58X-F3AAGR0BN-1416, engineered for full mechanical and electrical compatibility while allowing flexibility for non-standard requirements. With a typical lead time of 15 working days, our replacement units provide rapid availability and reliable operation in critical environments.
Datos técnicos
Especificaciones generales
| Parámetro | Valor |
|---|---|
| Tipo de detección | muestreo fotoeléctrico |
| Tipo de dispositivo | Encóder absoluto multivuelta |
| Número de expediente UL | E223176 "For use in NFPA 79 Applications only", if UL marking is marked on the product |
Especificaciones eléctricas
| Parámetro | Valor |
|---|---|
| Operating voltage | 10...30V DC |
| Current consumption | max. 230mA at 10V DC, max. 100mA at 24V DC |
| Time delay before availability | <1000ms |
| Linealidad | ±2 LSB at 16 Bit, +1 LSB at 13 Bit, +0,5 LSB at 12 Bit |
| Código de salida | código binario |
| Counting direction | programmable, cw ascending/descending |
Interface specifications
| Parámetro | Valor |
|---|---|
| Tipo de interfaz | PROFIBUS |
| Resolución | Single turn: up to 16 Bit; Multiturn: 14 Bit; Total: up to 30 Bit |
| Tasa de transferencia | 0.0096...12 MBit/s |
| Conformidad con las normas | Perfil PNO 3.062, RS-485 |
| Terminal compartment | in removable housing cover |
Mechanical specifications
| Parámetro | Valor |
|---|---|
| Material | Housing: powder coated aluminum; Flange: aluminum; Shaft: stainless steel |
| Masa | approx. 600g |
| Velocidad de rotación | máx. 6000 min-¹ |
| Momento de inercia | 30gcm² |
| Par de arranque | ≤3 Ncm |
| Tightening torque | max. 1.8 Nm |
| Angular offset | ±0.9° |
| Axial offset | static: ±0.3mm, dynamic: ±0.1mm |
| Radial offset | static: ±0.5mm, dynamic: ±0.2mm |
Hazardous areas specifications
| Parámetro | Valor |
|---|---|
| ATEX marking | 1 II 3D Ex tc IIIC T120°C Dc X; 1 II 3G Ex nA IIB T4 Gc X |
| Certificate | PF 19 CERT 5194 X |
| Directive conformity | Directive 2014/34/EU; EN 60079-0:2012+A11:2013; EN 60079-15:2010; EN 60079-31:2014 |
Environmental specifications
| Parámetro | Valor |
|---|---|
| Grado de protección | IP64 (shaft side), IP65 (housing side) |
| Temperatura de funcionamiento | -30...55°C (-22...131°F) |
| Temperatura de almacenamiento | -30...70°C (-22...158°F) |
| Resistencia a los golpes | DIN EN 60068-2-27, 100g, 6ms |
| Resistencia a las vibraciones | DIN EN 60068-2-6, 10g, 10...2000Hz |
