We offer a customized replacement for the EXAGN-DPC1B-1213-A-SA-01-66-00-FZ-C-00 Profibus explosion-proof absolute encoder. Our replacement is produced through non-standard customization, maintaining all application parameters and installation dimensions of the original unit. This guarantees full compatibility and allows seamless replacement without modifying your existing system. The production lead time is 15 working days, significantly accelerating procurement and reducing downtime in industrial operations.
The EXAGN-DPC1B-1213-A-SA-01-66-00-FZ-C-00 encoder is designed for harsh, explosive environments, featuring a Profibus DPV2 interface and high-resolution absolute measurement. Its aluminum housing and stainless steel shaft ensure mechanical strength while providing reliable operation in dust, water, vibration, and shock conditions. Certified under ATEX and IECEx, it operates in a temperature range of –40 °C to +70 °C, and the shaft supports axial loads of 60 N and radial loads of 80 N, suitable for chemical plants, offshore oil rigs, mining equipment, and oil & gas operations. The removable end cap enables easy address configuration, and integrated termination resistors ensure stable Profibus communication. This replacement ensures accurate absolute positioning while complying fully with safety regulations.
Replacement product physical photograph.
Technical data
Electrical Specifications
| Paramètres | Détails |
|---|---|
| Code | Absolute - Binary |
| Interface | Profibus - DPDPV2 - DualityLine Driver according to RS 485；galvanically isolated by opto - couplers |
| Resolution | Max. 14 bit (16384 revolutionsMax. 16 bit (65536) steps per rev. |
| Device Addressing | Adjustable by rotary switches inthe connection cap |
| Transmission Rate | Max. 12 MBaud |
| Supply Voltage | 10 to 30 Vdc |
| Current Consumption | Max. 115 mA with 10 VdcMax. 50 mA with 30 Vdc |
| Power Consumption | Max. 2.5 watts |
| Step Frequency LSB | 800 kHz |
| Accuracy of Division | +/- ½ LSB (12 bit)+/- 2 LSB (16 bit) |
| Electrical Lifetime | > 10⁵ hours |
| Electrical Protection | Reverse polarity and over - voltage - peak protection |
| Noise Immunity | EN61000 - 6 - 2 |
| Emitted Interference | EN 61000 - 6 - 4 |
Mechanical Specifications
| Paramètres | Détails |
|---|---|
| Material | Housing：Stainless SteelCap：Stainless SteelShaft：Stainless Steel |
| Weight | Stainless Steel: ~ 3100 gr (109.35 oz) |
| Bearing Life | > 1,9 x 10¹⁰ revolutions at rated load |
| Shaft Speed | 6,000 rpm (max.), IP 643,000 rpm at 25°C, IP 65/66/67/68 |
| Starting Torque | ≤ 0,01 Nm (max)≤ 0,03 Nm at 25°C (with seal) |
| Rotor Mass Moment of Inertia | 42 g·cm² (5,95 x 10⁻⁴ oz-in-sec²) |
| Shaft Loads | Axial：60 N (13,50 lbs) max.Radial：80 N (17,98 lbs) max. |
Environmental Specifications
| Paramètres | Détails |
|---|---|
| Operating Temp. | -40° to +70°C |
| Storage Temp. | -40° to +70°C |
| Shock | 100g @ 11 ms |
| Vibration | 10g @ 10 - 2000 Hz |
| Bump | 10g @ 16 ms (1000 x 3 axis) |
| Humidity | 98% RH without condensation |
| Enclosure Rating | IP 64 / Nema 4 (approx.)IP 65 / Nema 5 (approx.)IP 66 / Nema 6 (approx.)IP 67 / Nema 6 (approx.)IP 68 (1 hour/1 meter) / Nema 6P (approx.) |
Certifications
| Certification | Détails |
|---|---|
| ATEX | Certificate No.：ITS09ATEX16925XContent：I M2 Ex db I Mb, -40℃≤Ta≤+70℃ |
| ATEX DEKRA | Certificate No.：BVS 18.ATEX E 059 XContent：I M2 Ex db I Mb -40℃<T.amb<+70℃ |
| IECEx | Certificate No.：IECEx ITS 10.0009XContent：Ex db I Mb, -40℃≤Ta≤+70℃ |
| IECEx TSA | Certificate No.：IECEx TSA 11.0008XContent：Ex db I Mb, -40℃≤Ta≤+70℃ |
| EAC | Certificate No.：HAHH10 «IICB» No. EA3C RU - EAC C - DK.AA87B.00266/19Content：PB Ex db I Mb X -40℃<T.amb<+70℃ |
