30-3601_A-1024 Incremental Encoder Custom Replacement Model
Custom Replacement Solution
We provide a custom replacement solution for the 30-3601_A-1024 model, offering tailored configurations to meet specific application requirements. Customers can request adaptations in shaft dimensions, mounting flanges, and pulse output signals while maintaining the original performance standards. These non-standard encoders are produced efficiently and can be delivered within approximately 10 working days, allowing clients to minimize downtime and ensure continuous production.
Product Review
The 30-3601_A-1024 incremental encoder is built for high-reliability industrial applications where mechanical stress and harsh environments are common. Its robust steel housing and reinforced shaft withstand radial loads up to 80 N and axial loads up to 60 N. With 1024 PPR output, it provides precise incremental position feedback suitable for automation systems, conveyor lines, and heavy-duty machinery. The IP65-rated enclosure ensures protection against dust and water, delivering reliable performance in challenging conditions.
Données techniques
| Specification Category | Paramètres | Détails |
|---|---|---|
| General specifications | Pulse count | max. 5000 |
| Electrical specifications | Operating voltage (UG) | 10 … 30 V DC |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Category | Paramètres | Détails |
|---|---|---|
| Connection | Connector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Standard conformity | Degree of protection | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Ambient Conditions
| Paramètres | Détails |
|---|---|
| Operating temperature | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Storage temperature | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
Mechanical Specifications
| Paramètres | Détails |
|---|---|
| Material | Combination 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Mass | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Rotational speed | max. 6000 min⁻¹ |
| Moment of inertia | < 270 g·m² |
| Starting torque | ≤ 5 N·cm |
| Shaft load | Axial: 60 NRadial: 80 N |
