30-3601_A-300 Incremental Encoder Custom Replacement Model
Custom Replacement Solution
Our custom replacement solution for the 30-3601_A-300 model allows non-standard adaptations in shaft design, flange type, and electrical output configuration. Produced in-house with high precision, these units can be delivered within approximately 10 working days, providing a fast and reliable alternative to the original encoder.
Product Review
The 30-3601_A-300 incremental encoder features 300 PPR output and is suitable for industrial automation applications. Its steel housing and reinforced shaft withstand radial and axial loads, while the IP65-rated enclosure ensures durability in dusty, wet, or vibrating environments. It is ideal for conveyors, robotic systems, and automated machinery.
Données techniques
| Specification Category | Paramètres | Détails |
|---|---|---|
| General specifications | Pulse count | max. 5000 |
| Electrical specifications | Operating voltage (UG) | 10 … 30 V DC |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Category | Paramètres | Détails |
|---|---|---|
| Connection | Connector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Standard conformity | Degree of protection | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Ambient Conditions
| Paramètres | Détails |
|---|---|
| Operating temperature | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Storage temperature | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
Mechanical Specifications
| Paramètres | Détails |
|---|---|
| Material | Combination 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Mass | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Rotational speed | max. 6000 min⁻¹ |
| Moment of inertia | < 270 g·m² |
| Starting torque | ≤ 5 N·cm |
| Shaft load | Axial: 60 NRadial: 80 N |
Clause de non-responsabilité :
Tout le contenu de ce site est original, sauf indication contraire. La copie, la collecte ou la publication de tout matériel sans notre autorisation est interdite. Si un contenu enfreint les droits d'auteur, veuillez nous contacter.
