30-3601_A-200 Incremental Encoder Custom Replacement Model
Custom Replacement Solution
We provide a custom replacement solution for the 30-3601_A-200 incremental encoder, offering non-standard adaptations such as shaft diameter, flange type, and output signal options. Produced with high precision in-house, these encoders ensure compatibility with your existing system and are delivered within approximately 10 working days. This rapid delivery minimizes downtime and supports continuous production in industrial environments. The replacement units maintain the original performance while providing flexibility to meet specialized application needs.
Product Review
The 30-3601_A-200 incremental encoder delivers 200 PPR output for accurate motion feedback in industrial automation. Its durable steel housing and reinforced shaft resist radial and axial loads, while IP65-rated protection ensures reliability in dusty, wet, or vibrating conditions. This encoder is suitable for conveyor systems, packaging machinery, and automation equipment, offering consistent performance and precise incremental signals for motion control applications.
Données techniques
| Specification Category | Paramètres | Détails |
|---|---|---|
| General specifications | Pulse count | max. 5000 |
| Electrical specifications | Operating voltage (UG) | 10 … 30 V DC |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Category | Paramètres | Détails |
|---|---|---|
| Connection | Connector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Standard conformity | Degree of protection | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Ambient Conditions
| Paramètres | Détails |
|---|---|
| Operating temperature | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Storage temperature | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
Mechanical Specifications
| Paramètres | Détails |
|---|---|
| Material | Combination 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Mass | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Rotational speed | max. 6000 min⁻¹ |
| Moment of inertia | < 270 g·m² |
| Starting torque | ≤ 5 N·cm |
| Shaft load | Axial: 60 NRadial: 80 N |
