30-3601IA-20 Incremental Encoder Custom Replacement Model
Custom Replacement Solution
Our custom replacement units for the 30-3601IA-20 model offer non-standard adaptations, including shaft length, flange design, and output signal options. Produced efficiently in-house, these encoders are delivered within approximately 10 working days. This solution allows industrial operators to quickly replace original components while maintaining operational continuity. The adaptability of our custom encoders ensures they meet specialized requirements in various automation and motion control applications.
Product Review
The 30-3601IA-20 incremental encoder features 20 PPR output, ideal for low-resolution motion feedback in industrial automation. Its steel housing and reinforced shaft provide durability under mechanical stress, and the IP65-rated enclosure ensures protection against dust, water, and vibration. The encoder is widely used in conveyor systems, robotic assemblies, and automated machinery requiring reliable and consistent incremental signals.
Données techniques
| Specification Category | Paramètres | Détails |
|---|---|---|
| General specifications | Pulse count | max. 5000 |
| Electrical specifications | Operating voltage (UG) | 10 … 30 V DC |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Category | Paramètres | Détails |
|---|---|---|
| Connection | Connector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Standard conformity | Degree of protection | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Ambient Conditions
| Paramètres | Détails |
|---|---|
| Operating temperature | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Storage temperature | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
Mechanical Specifications
| Paramètres | Détails |
|---|---|
| Material | Combination 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Mass | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Rotational speed | max. 6000 min⁻¹ |
| Moment of inertia | < 270 g·m² |
| Starting torque | ≤ 5 N·cm |
| Shaft load | Axial: 60 NRadial: 80 N |
