The FGH6KK-1000G-90G-NG/50P incremental encoder has long been a trusted feedback component in automation systems within steel and heavy engineering sectors. We now offer a fully customized replacement version that reproduces its 1:1 output, mechanical interface, and connector configuration. This allows a direct drop-in replacement, enabling users to quickly restore production without extensive downtime. Our replacement encoders are manufactured under strict quality control to guarantee consistent signal precision and robust performance.
This model has been implemented in a wide range of metallurgical machinery and industrial drives where accuracy, durability, and stability are critical. The replacement encoder incorporates advanced materials and improved sealing design to resist wear and corrosion. The product’s construction is optimized for endurance under continuous operation, ensuring long-term reliability even in the most demanding industrial applications.
Replacement solution image.
Technical Parameters Table
1. Electrical and mechanical data
| Item | Value |
|---|---|
| Pulse | 1024, 2000 |
| Preferred pulse rates (nickel disks) | 256, 600, 1000, 1200, 1920, 2048, 2500, 4000, 4096, 5000 |
| Pulse rates available | - |
2. Connection data
| Item | Value |
|---|---|
| Supply voltage | 12 … 30 VDC (Option: 5 VDC) |
| No-load-current | approx. 100 mA at 30 V (without Option) |
| Outputs | Differential-driver, resistant to sustained short-circuit, current limited, short-circuit. |
| Pulse height (HTL) | approx. as supply voltage |
| Internal resistance | 50 Ω per output |
| Pulse height (TTL) | 5 V to RS 422 |
| Slew rate | 50 V / μs |
| Pulse duty factor | 1:1 ± 5 % |
| Max. frequency | to 50 KHz < 3 %to 150 KHz < 5 %0 to 100 KHz. (to 150 KHz on request) |
3. Encoder temperature ranges
| Item | Value |
|---|---|
| Standard | 0°C … + 70°C |
| Special temperature | -25°C … + 85°C |
4. Special output voltage 5V (TTL)
| Item | Value |
|---|---|
| Pulse height | 5V, RS422 compatible (TIA/EIA - Standard) |
| Supply voltage | 12 … 30 VDC |
5. Protection class (DIN EN 60529)
| Protection class DIN EN 60529 | Sealing | Mechanical speed | Description | Breakaway torque |
|---|---|---|---|---|
| IP 54 | Special seal | ≤ 4000 rpm | Protection against dust and water spray | approx. 30 to 50 Ncm |
| IP 66only drive side | Radial shaft seal | ≤ 1500 rpm | Protection against dust and water spray | approx. 60 Ncm |
| IP 66both sides | Radial shaft seal | ≤ 1100 rpm | Protection against dust and water spray | approx. 70 Ncm |
6. Weight
| Item | Type K | Type KK |
|---|---|---|
| Weight | 6 kg | 6,8 kg |
