Product Review
Le PSM58X-F3AAGR0BN-1213 offers highly accurate multiturn absolute positioning for industrial automation in explosive zones. Its Profibus communication ensures seamless integration with control systems, while its mechanical design—including IP65/IP64 housing, stainless-steel shaft, and robust bearings—delivers reliable operation in harsh conditions. Extended functions such as commissioning mode, programmable limits, and scaling make it highly versatile for complex applications.
Custom Replacement Solution
We provide a custom-engineered replacement for the PSM58X-F3AAGR0BN-1213, maintaining drop-in compatibility with existing installations. With a 15-day average lead time, our non-standard solutions allow industries to maintain productivity without delays or compromise in safety.
Données techniques
General specifications
| Paramètres | Valeur |
|---|---|
| Detection type | photoelectric sampling |
| Device type | Multiturn absolute encoder |
| UL File Number | E223176 "For use in NFPA 79 Applications only", if UL marking is marked on the product |
Electrical specifications
| Paramètres | Valeur |
|---|---|
| Operating voltage | 10...30V DC |
| Current consumption | max. 230mA at 10V DC, max. 100mA at 24V DC |
| Time delay before availability | <1000ms |
| Linearity | ±2 LSB at 16 Bit, +1 LSB at 13 Bit, +0,5 LSB at 12 Bit |
| Output code | binary code |
| Counting direction | programmable, cw ascending/descending |
Interface specifications
| Paramètres | Valeur |
|---|---|
| Interface type | PROFIBUS |
| Resolution | Single turn: up to 16 Bit; Multiturn: 14 Bit; Total: up to 30 Bit |
| Transfer rate | 0.0096...12 MBit/s |
| Standard conformity | PNO profile 3.062, RS-485 |
| Terminal compartment | in removable housing cover |
Mechanical specifications
| Paramètres | Valeur |
|---|---|
| Material | Housing: powder coated aluminum; Flange: aluminum; Shaft: stainless steel |
| Mass | approx. 600g |
| Rotational speed | max. 6000 min⁻¹ |
| Moment of inertia | 30gcm² |
| Starting torque | ≤3 Ncm |
| Tightening torque | max. 1.8 Nm |
| Angular offset | ±0.9° |
| Axial offset | static: ±0.3mm, dynamic: ±0.1mm |
| Radial offset | static: ±0.5mm, dynamic: ±0.2mm |
Hazardous areas specifications
| Paramètres | Valeur |
|---|---|
| ATEX marking | 1 II 3D Ex tc IIIC T120°C Dc X; 1 II 3G Ex nA IIB T4 Gc X |
| Certificate | PF 19 CERT 5194 X |
| Directive conformity | Directive 2014/34/EU; EN 60079-0:2012+A11:2013; EN 60079-15:2010; EN 60079-31:2014 |
Environmental specifications
| Paramètres | Valeur |
|---|---|
| Degree of protection | IP64 (shaft side), IP65 (housing side) |
| Operating temperature | -30...55°C (-22...131°F) |
| Storage temperature | -30...70°C (-22...158°F) |
| Shock resistance | DIN EN 60068-2-27, 100g, 6ms |
| Vibration resistance | DIN EN 60068-2-6, 10g, 10...2000Hz |
