We provide a customized replacement for the EXAGN-S101G-1213-A-SA-01-66-00-FZ-C-00 SSI explosion-proof absolute encoder. This replacement is produced via non-standard customization, fully preserving the original model’s mechanical and electrical parameters and installation dimensions, ensuring complete interchangeability. The production lead time is approximately 15 working days, offering clients a rapid solution to reduce operational downtime and procurement delays. Customers can rely on a direct-fit replacement that meets stringent industrial requirements.
The EXAGN-S101G-1213-A-SA-01-66-00-FZ-C-00 encoder is equipped with a high-resolution SSI interface, providing precise absolute positioning for automated systems. Its stainless steel shaft and aluminum housing ensure high durability under harsh industrial conditions. Certified for explosion-proof applications (ATEX, IECEx, Class I Division 2), the encoder withstands hazardous environments, with operational temperature ranging from –40 °C to +70 °C and IP64–IP68 protection. The device is capable of handling axial loads up to 60 N and radial loads up to 80 N, making it suitable for critical applications such as offshore oil platforms, chemical processing, mining, and other hazardous industrial equipment. The removable end cap simplifies field configuration and address settings, and integrated protection circuits enhance electrical safety.
Replacement product physical photograph.
Data teknis
Spesifikasi Listrik
| Parameter | Detail |
|---|---|
| Code | Absolute – Binary or Gray Code |
| Interface | Synchronous Serial (SSI)Driver meets EIA standard RS422 |
| Resolution | Max. 14 bit (16384) revolutionsMax. 16 bit (65536) steps per rev. |
| Transfer Distance | Up to 1200 m (3937 ft) |
| Clock Input | RS422 compatible via optocoupler |
| Data Output | Line Driver RS422 |
| Clock Frequency | 100 kHz to 2 MHz |
| Accuracy of Division | +/- ½ LSB (12 bit)+/- ¼ LSB (16 bit) |
| Cycle Time | < 25 µs |
| Turn On Time | < 1 s |
| Supply Voltage | 4.5 to 30 VDC (Absolute limits)According to EN 50 178 |
| Power Consumption | Max. 1.5 watts |
| Electrical Protection | Reverse polarity and over-voltage-peak protection |
| Noise Immunity | EN61000-6-2 |
| Emitted Interference | EN 61000-6-4 |
Mechanical Specifications
| Parameter | Detail |
|---|---|
| Material | Housing: Aluminum or Stainless SteelCap: Aluminum or Stainless SteelShaft: Stainless Steel |
| Berat | Aluminum: ~ 1600 gr (56.44 oz)Stainless Steel: ~ 3100 gr (109.35 oz) |
| Bearing Life | > 1.9 × 10¹⁰ revolutions at rated load |
| Shaft Speed | 6,000 rpm (max.)，IP 643,000 rpm (max.)，IP 65/66/67/68 |
| Starting Torque | ≤ 0.01 Nm at 25°C（with seal）≤ 0.03 Nm at 25°C（without seal） |
| Rotor Mass Moment of Inertia | 42 gcm² (5.95 × 10⁻⁴ oz-in-sec²) |
| Shaft Loads | Aksial: 60 N (13,50 lbs) maks.radial: 80 N (17,98 lbs) maks. |
Environmental Specifications
| Parameter | Detail |
|---|---|
| Operating Temp. | -40° to +70°C |
| Storage Temp. | -40° to +70°C |
| Shock | 100g @ 11 ms |
| Vibration | 10g @ 10 - 2000 Hz |
| Bump | 10g @ 16 ms (1000 x 3 axis) |
| Humidity | 98% RH without condensation |
| Enclosure Rating | IP 64 / Nema 4 (approx.)IP 65 / Nema 5 (approx.)IP 66 / Nema 6 (approx.)IP 67 / Nema 6 (1hour/1meter) / Nema 6P (approx.) |
