30-3601_A-3600 Incremental Encoder Custom Replacement Model
Custom Replacement Solution
We offer a custom replacement variant of the 30-3601_A-3600 encoder that allows non-standard configurations such as shaft diameter, flange type, and output signals. These custom units are produced quickly and delivered within approximately 10 working days, ensuring reliable and timely support for production lines.
Product Review
The 30-3601_A-3600 incremental encoder combines high-resolution 3600 PPR output with durable construction. Its steel housing and reinforced shaft withstand high radial and axial loads, and IP65 protection ensures reliability against dust, water, and vibration. This makes it suitable for industrial automation, robotics, and material handling applications.
Data Teknis
| Specification Category | Parameter | Detail |
|---|---|---|
| General specifications | Pulse count | max. 5000 |
| Electrical specifications | Operating voltage (UG) | 10 … 30 V DC |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Category | Parameter | Detail |
|---|---|---|
| Koneksi | Connector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Standard conformity | Degree of protection | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Ambient Conditions
| Parameter | Detail |
|---|---|
| Suhu pengoperasian | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Storage temperature | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
Mechanical Specifications
| Parameter | Detail |
|---|---|
| Material | Combination 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Mass | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Rotational speed | max. 6000 min⁻¹ |
| Momen inersia | < 270 g·m² |
| Starting torque | ≤ 5 N·cm |
| Shaft load | Axial: 60 NRadial: 80 N |
Penafian:
Semua konten di situs ini adalah asli kecuali dinyatakan lain. Dilarang menyalin, mengumpulkan, atau mempublikasikan materi apa pun tanpa izin dari kami. Jika ada konten yang melanggar hak cipta, silakan hubungi kami.
