30-3601_A-300 Incremental Encoder Custom Replacement Model
Custom Replacement Solution
Our custom replacement solution for the 30-3601_A-300 model allows non-standard adaptations in shaft design, flange type, and electrical output configuration. Produced in-house with high precision, these units can be delivered within approximately 10 working days, providing a fast and reliable alternative to the original encoder.
Product Review
The 30-3601_A-300 incremental encoder features 300 PPR output and is suitable for industrial automation applications. Its steel housing and reinforced shaft withstand radial and axial loads, while the IP65-rated enclosure ensures durability in dusty, wet, or vibrating environments. It is ideal for conveyors, robotic systems, and automated machinery.
Data Teknis
| Specification Category | Parameter | Detail |
|---|---|---|
| General specifications | Pulse count | max. 5000 |
| Electrical specifications | Operating voltage (UG) | 10 … 30 V DC |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Category | Parameter | Detail |
|---|---|---|
| Koneksi | Connector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Standard conformity | Degree of protection | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Ambient Conditions
| Parameter | Detail |
|---|---|
| Suhu pengoperasian | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Storage temperature | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
Mechanical Specifications
| Parameter | Detail |
|---|---|
| Material | Combination 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Mass | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Rotational speed | max. 6000 min⁻¹ |
| Momen inersia | < 270 g·m² |
| Starting torque | ≤ 5 N·cm |
| Shaft load | Axial: 60 NRadial: 80 N |
Penafian:
Semua konten di situs ini adalah asli kecuali dinyatakan lain. Dilarang menyalin, mengumpulkan, atau mempublikasikan materi apa pun tanpa izin dari kami. Jika ada konten yang melanggar hak cipta, silakan hubungi kami.
