30-3601IA-4000 Incremental Encoder Custom Replacement Model
Custom Replacement Solution
Our custom replacement units for the 30-3601IA-4000 encoder include non-standard options for shaft type, flange configuration, and signal output. Produced in-house with precision, these encoders are delivered within approximately 10 working days. This solution ensures rapid replacement and minimal production downtime while maintaining original performance. The units are ideal for specialized automation and motion control applications.
Product Review
The 30-3601IA-4000 incremental encoder provides 4000 PPR output for high-resolution motion feedback. Its steel housing and reinforced shaft withstand mechanical stress, and the IP65-rated enclosure protects against dust, moisture, and vibrations. The encoder is suitable for robotic systems, automated packaging machinery, and industrial automation processes requiring accurate incremental feedback.
Data Teknis
| Specification Category | Parameter | Detail |
|---|---|---|
| General specifications | Pulse count | max. 5000 |
| Electrical specifications | Operating voltage (UG) | 10 … 30 V DC |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Category | Parameter | Detail |
|---|---|---|
| Koneksi | Connector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Standard conformity | Degree of protection | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Ambient Conditions
| Parameter | Detail |
|---|---|
| Suhu pengoperasian | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Storage temperature | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
Mechanical Specifications
| Parameter | Detail |
|---|---|
| Material | Combination 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Mass | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Rotational speed | max. 6000 min⁻¹ |
| Momen inersia | < 270 g·m² |
| Starting torque | ≤ 5 N·cm |
| Shaft load | Axial: 60 NRadial: 80 N |
