ESM58N-F1APNR0BN-1213 ProfiNet Encoder Custom Replacement Solution
Custom Replacement Solution
Our company offers a fully customized replacement solution for the ESM58N-F1APNR0BN-1213 encoder. The replacement product is engineered to match the original encoder’s application parameters and installation dimensions precisely. With a production lead time of approximately 10 working days, this solution ensures rapid delivery for industrial applications. The replacement units have earned positive feedback across international markets including South America, Southeast Asia, the Middle East, and Russia, highlighting their reliability and stable performance in demanding environments.
Product Review
The ESM58N-F1APNR0BN-1213 is a 30-bit absolute multiturn encoder, combining 16-bit single-turn resolution with 14-bit multiturn coding. It features a standard Ø58 mm industrial housing, a recessed hollow shaft, and supports PROFINET IRT. The integrated 2-port switch allows network loop-through while supporting multiple operation modes: polled, cyclic, and change-of-state. The built-in webserver enables full parameterization through any standard browser, including resolution adjustment, IP address changes, and email notifications. Its robust design ensures mechanical compatibility with major fieldbus encoders and stable operation without requiring couplings.
Replacement model image below.
Data Teknis
| Specification Category | Parameter | Detail |
|---|---|---|
| General specifications | Detection type | photoelectric sampling |
| Device type | Multiturn absolute encoder | |
| UL File Number | E223176 "For use in NFPA 79 Applications only", fUL marking is marked on the product. | |
| Functional safety related parameters | MTTFd | 120 a |
| Mission Time (Tm) | 20 a | |
| Load | EN 611 at 6000 rpm and 20/40 N axial/radial shaft load | |
| Diagnostic Coverage (DC) | 0 % | |
| Electrical specifications | Operating voltage Uₐ | 10 … 30 V DC |
| Power consumption P₀ | max. 4 W | |
| Linearity | ± 0.5 LSB (12 Bit) | |
| Kode keluaran | binary code | |
| Code course (counting direction) | cw ascending (clockwise rotation, code course ascending)ccw descending (clockwise rotation, code course descending) | |
| Interface | Interface type | PROFINET IO |
| Resolution | Single turn: up to 16 BitMultiturn: 14 BitOverall resolution: up to 30 Bit | |
| Physical | Ethernet | |
| Transfer rate | 100 MBit/s | |
| Cycle time (RT) | > 1 ms, ≤ 10 ms (RT) | |
| Koneksi | Connector | Ethernet: 2 sockets M12 1,4-pin, D-codedSupply: 1 plug M12 1,4-pin, A-coded |
| Standard conformity | Degree of protection | DIN EN 60529:- shaft side: IP64 (without shaft seal)/IP66 (with shaft seal)- housing: IP65- Stainless steel version (inox): completely IP67 |
| Climatic testing | EN 60068-2-3: no moisture condensation | |
| Shock resistance | EN 60068-2-27: 100 g, 6 ms | |
| Vibration resistance | EN 60068-2-6: 10 g ... 2000 Hz |
Ambient Conditions
| Parameter | Detail |
|---|---|
| Suhu pengoperasian | -40 … 85 °C (-40 … 185 °F) |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
Mechanical Specifications
| Parameter | Detail |
|---|---|
| Material | Standard version:housing: powder coated aluminumflange: aluminumshaft: stainless steelCombination 1:housing: powder coated aluminumflange: aluminumshaft: stainless steelCombination 2 (inox):housing: stainless steel 1.4305 / AISI 303flange: stainless steel 1.4301 / AISI 304shaft: stainless steel 1.4305 / AISI 303 |
| Mass | approx. 910 g (combination 1)approx. 1200 g (combination 2) |
| Rotational speed | max. 6000 min⁻¹ |
| Momen inersia | 30 gcm² |
| Starting torque | 30 mNmmax. 3 Nm (version without shaft seal) |
| Tightening torque, fastening screws | max. 1.18 Nm |
| Shaft offset | Axial offset: ± 0.9 °Radial offset: - static: ± 0.3 mm, dynamic: ± 0.1 mm - static: ± 0.5 mm, dynamic: ± 0.2 mm |
| Shaft load | Axial: 20 NRadial: 40 N |
| Dimensions | Diameter: 59 mm |
Approvals and Certificates
| Certification | Detail |
|---|---|
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
