The 862007954-1024 811336-01 is a high-performance incremental encoder designed for demanding industrial environments where accurate and reliable motion feedback is critical. A fully compatible replacement solution is available, matching the original hollow shaft dimensions, mechanical interfaces, and electrical output specifications. Standard delivery time is 10 working days, allowing efficient maintenance, equipment upgrades, or system retrofits with minimal downtime.
This encoder features a durable metal housing and blind hollow shaft, providing excellent resistance to vibration, shock, and harsh environmental conditions. With a resolution of 1024 pulses per revolution, it delivers precise speed and position feedback for motors and automated motion control systems. The encoder supports multiple output formats, including HTL, TTL, and HCHTL, ensuring broad compatibility with industrial drives, PLCs, and control units. Its IP67-rated enclosure and wide operating temperature range make it suitable for heavy industrial applications such as steel mills, cranes, wind turbines, and paper production lines. The rugged design guarantees long-term operational stability even under exposure to dust, moisture, or temperature fluctuations, making it a reliable choice for continuous and critical industrial processes.
Gambar solusi pengganti
I. Technical data
| Parameter | Detail |
|---|---|
| Suhu pengoperasian | -40 °C ... +85 °C |
| Kelas perlindungan masuknya air [IEC 60529]. | IP67 (IP65 at shaft inlet) |
| Guncangan [IEC 60068-2-27] | ≤ 1500 m/s² |
| Bahan penutup | Aluminium (coated) |
| Berat | 1300 g |
| Shaft load (axial/rradial) | 100 N / 300 N |
| Kecepatan rotasi maks | 6000 rpm |
| Bahan poros | Stainless steel with insulated hybrid bearings |
| Short circuit protected | Ya. |
| Polaritas terlindungi | Ya. |
| Current consumption | 60 mA at 24 Vdc (Max 80 mA) |
| Output load | ≤ 40 mA |
| Output frequency max | 200 kHz |
| Cable length max | 350 m at 100 kHz |
| Number of channels | 90° el ± 2.5° el |
| Dividing error | ±50" el |
II. Encoder configuration
| Parameter | Detail |
|---|---|
| Code key description | 86E00795/4 |
| Jenis | XH |
| Model | 862 |
| Jenis poros | Ø12 mm blind hollow shaft |
| Jenis flensa | 865-flange |
| Resolusi | 1024 |
| Catu daya | 9-30 Vdc |
| Output signal | HT - HTL |
| Jenis koneksi | Kabel |
| Menghubungkan arah | Radial |
| Panjang kabel | 6.00 m |
| Cable gland dimension | M20 for Ø8 - 11 mm cables |
| Number of channels | 3 |
| Advanced Diagnostic System | Available upon request |
| Overvoltage protection | Available upon request |
| Torque bracket | Available upon request |
