The FGH6K-2000G-90G-NG/50P is a through hollow shaft encoder frequently applied in heavy machinery and metallurgy automation systems. For customers who can no longer source the original product, we provide a direct 1:1 custom replacement encoder. Each unit is engineered to replicate the mechanical shaft interface, output signal type, and electrical configuration of the original. This ensures a smooth installation process and consistent operational reliability. We also focus on reducing lead time to help customers overcome supply chain constraints efficiently.
This encoder type is popular in applications such as continuous casting machines, industrial cranes, and rolling drives. It withstands vibration, shock, and temperature variation while maintaining high signal accuracy. Our replacement version not only preserves the same performance characteristics but also adopts enhanced sealing and upgraded bearings for longer service life under heavy load operations.
Replacement solution image.
Technical Parameters Table
1. Electrical and mechanical data
| Item | Value |
|---|---|
| Pulse | 1024, 2000 |
| Preferred pulse rates (nickel disks) | 256, 600, 1000, 1200, 1920, 2048, 2500, 4000, 4096, 5000 |
| Pulse rates available | - |
2. Connection data
| Item | Value |
|---|---|
| Supply voltage | 12 … 30 VDC (Option: 5 VDC) |
| No-load-current | approx. 100 mA at 30 V (without Option) |
| Outputs | Differential-driver, resistant to sustained short-circuit, current limited, short-circuit. |
| Pulse height (HTL) | approx. as supply voltage |
| Internal resistance | 50 Ω per output |
| Pulse height (TTL) | 5 V to RS 422 |
| Slew rate | 50 V / μs |
| Pulse duty factor | 1:1 ± 5 % |
| Max. frequency | to 50 KHz < 3 %to 150 KHz < 5 %0 to 100 KHz. (to 150 KHz on request) |
3. Encoder temperature ranges
| Item | Value |
|---|---|
| Standard | 0°C … + 70°C |
| Special temperature | -25°C … + 85°C |
4. Special output voltage 5V (TTL)
| Item | Value |
|---|---|
| Pulse height | 5V, RS422 compatible (TIA/EIA - Standard) |
| Supply voltage | 12 … 30 VDC |
5. Protection class (DIN EN 60529)
| Protection class DIN EN 60529 | Sealing | Mechanical speed | Description | Breakaway torque |
|---|---|---|---|---|
| IP 54 | Special seal | ≤ 4000 rpm | Protection against dust and water spray | approx. 30 to 50 Ncm |
| IP 66only drive side | Radial shaft seal | ≤ 1500 rpm | Protection against dust and water spray | approx. 60 Ncm |
| IP 66both sides | Radial shaft seal | ≤ 1100 rpm | Protection against dust and water spray | approx. 70 Ncm |
6. Weight
| Item | Type K | Type KK |
|---|---|---|
| Weight | 6 kg | 6,8 kg |
