Product Review
The PVM78E-011DRR0BI-1413 is an explosion-proof Profibus multiturn encoder optimized for harsh industrial environments. It delivers accurate absolute position feedback, high reliability, and durability in oil, gas, and chemical plants.
Custom Replacement Solution
We manufacture compatible replacement units for the PVM78E-011DRR0BI-1413 that match the original encoder’s Profibus interface, mechanical design, and multiturn capabilities. This ensures smooth installation and continuous operation without modifications.
Technical Data for Multiturn Absolute Rotary Encoder PVM78E
General Specifications
| Attribute | Detail |
|---|---|
| Detection Type | Photoelectric Sampling |
| Device Type | Multiturn Absolute Rotary Encoder |
| Functional Safety (MTTFd) | 210 a, L10: 7.7 E+9 at 3000 rpm |
| Operating Voltage (U_B) | 10 … 30 V DC |
| No-load Supply Current (I_0) | max. 230 mA at 10 V DC, max. 100 mA at 24 V DC |
| Time Delay Before Availability | < 1000 ms |
| Linearity | ± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0.5 LSB at 12 Bit |
| Output Code | Binary Code |
| Interface Type | PROFIBUS DP |
| Resolution | Single Turn: Up to 16 Bit, Multiturn: Up to 14 Bit, Overall: Up to 30 Bit |
| Transfer Rate | 0.0096 … 12 MBit/s |
| Standard Conformity | PNO profile 3.062, RS-485 |
Environmental and Durability
| Attribute | Detail |
|---|---|
| Degree of Protection | DIN EN 60529, IP66 |
| Climatic Testing | DIN EN 60068-2-78, no moisture condensation |
| Emitted Interference | EN 61000-6-4:2007/A1:2011 |
| Noise Immunity | EN 61000-6-2:2005 |
| Shock Resistance | DIN EN 60068-2-27, 100 g, 3 ms |
| Vibration Resistance | DIN EN 60068-2-6, 10 g, 10 … 2000 Hz |
Approvals and Certificates
| Attribute | Detail |
|---|---|
| IECEx Approval | Equipment protection level Gb, IECEx ITS 15.0061X |
| ATEX Approval | Equipment protection level Gb, ITS 15 ATEX 18372X |
Ambient Conditions
| Attribute | Range |
|---|---|
| Operating Temperature | -40 … 70 °C (-40 … 158 °F) |
| Storage Temperature | -40 … 85 °C (-40 … 185 °F) |
Mechanical Specifications
| Attribute | Detail |
|---|---|
| Material | Housing, Flange: Anodized Aluminum or Stainless Steel 1.4404 / AISI 316L, Shaft: Stainless Steel 1.4404 / AISI 316L |
| Mass | approx. 2600 g (combination 1), approx. 3900 g (combination 2) |
| Rotational Speed | max. 3000 min^-1 |
| Moment of Inertia | 180 gcm^2 |
| Starting Torque | ≤ 4 Ncm |
| Shaft Load | Axial: 60 N, Radial: 80 N |
Connectivity
| Attribute | Detail |
|---|---|
| Cable Connection | ∅9.6 mm, 7-core, Terminal compartment for connections |
Operating Modes and Parameters
| Operating Mode / Parameter | Description |
|---|---|
| Direction of Rotation | Programmable, cw ascending or descending |
| Scaling Function | Supported, programmable resolution per revolution |
| Preset Function | Supported, programmable preset value |
| Diagnostic Reporting | Expanded diagnostic reporting supported |
| Speed Transfer | Supported, with selectable unit |
| Limit Switches | Programmable limit switches (software) |
| Commissioning Mode | Supported, with commissioning mode |
Penafian:
Semua konten di situs ini adalah asli kecuali dinyatakan lain. Dilarang menyalin, mengumpulkan, atau mempublikasikan materi apa pun tanpa izin dari kami. Jika ada konten yang melanggar hak cipta, silakan hubungi kami.
