30-3601_A-250 Incremental Encoder Custom Replacement Model
Custom Replacement Solution
We provide a custom replacement option for the 30-3601_A-250 incremental encoder, supporting non-standard modifications including shaft diameter, flange type, and output signal configuration. Manufactured in-house with precision, these encoders are delivered within approximately 10 working days, enabling rapid replacement and minimizing production downtime. This service allows clients to adapt the encoder for specialized industrial applications while maintaining reliability and performance.
Product Review
The 30-3601_A-250 incremental encoder offers 250 PPR output, suitable for a wide range of industrial automation applications. Its robust steel housing and reinforced shaft provide resistance to radial and axial loads, while the IP65 enclosure ensures protection against dust, water, and vibration. The encoder is ideal for packaging machinery, conveyor systems, and automation equipment, delivering precise and consistent incremental feedback.
Dane techniczne
| Specification Category | Parametr | Szczegóły |
|---|---|---|
| General specifications | Pulse count | max. 5000 |
| Electrical specifications | Operating voltage (UG) | 10 … 30 V DC |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Category | Parametr | Szczegóły |
|---|---|---|
| Connection | Connector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Standard conformity | Degree of protection | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Ambient Conditions
| Parametr | Szczegóły |
|---|---|
| Operating temperature | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Storage temperature | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
Mechanical Specifications
| Parametr | Szczegóły |
|---|---|
| Material | Combination 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Mass | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Rotational speed | max. 6000 min⁻¹ |
| Moment of inertia | < 270 g·m² |
| Starting torque | ≤ 5 N·cm |
| Shaft load | Axial: 60 NRadial: 80 N |
