30-3601IA-2048 Incremental Encoder Custom Replacement Model
Custom Replacement Solution
We provide a custom replacement solution for the 30-3601IA-2048 incremental encoder, allowing non-standard adaptations such as shaft type, flange design, and electrical output modifications. These units are manufactured in-house with precision and delivered within approximately 10 working days. This service reduces lead times, allowing production to continue without interruption. The custom replacement units maintain original performance while providing flexibility to adapt to specific industrial automation needs.
Product Review
The 30-3601IA-2048 incremental encoder delivers 2048 PPR output for high-precision industrial applications. Its robust steel housing and reinforced shaft handle both radial and axial loads effectively. The IP65-rated enclosure provides excellent protection against dust, water, and vibrations. This encoder is suitable for robotics, conveyor lines, and automated machinery requiring precise incremental feedback for optimal performance.
Dane techniczne
| Specification Category | Parametr | Szczegóły |
|---|---|---|
| General specifications | Pulse count | max. 5000 |
| Electrical specifications | Operating voltage (UG) | 10 … 30 V DC |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Category | Parametr | Szczegóły |
|---|---|---|
| Connection | Connector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Standard conformity | Degree of protection | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Ambient Conditions
| Parametr | Szczegóły |
|---|---|
| Operating temperature | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Storage temperature | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
Mechanical Specifications
| Parametr | Szczegóły |
|---|---|
| Material | Combination 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Mass | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Rotational speed | max. 6000 min⁻¹ |
| Moment of inertia | < 270 g·m² |
| Starting torque | ≤ 5 N·cm |
| Shaft load | Axial: 60 NRadial: 80 N |
