ESM58W-F2APNR0BN-1416 ProfiNet Encoder Custom Replacement Solution
Custom Replacement Solution
We provide a fully customized replacement for the ESM58W-F2APNR0BN-1416 encoder, matching all installation dimensions and performance specifications of the original. The production cycle is approximately 10 working days. International customers in South America, Southeast Asia, the Middle East, and Russia have adopted these replacement encoders, reporting excellent operational stability and reliability in industrial automation settings.
Product Review
The ESM58W-F2APNR0BN-1416 delivers 30-bit absolute multiturn encoding with a standard Ø58 mm housing and recessed hollow shaft. Supporting PROFINET IRT, it allows network loop-through with an integrated 2-port switch. Users can select polled, cyclic, or change-of-state operation modes. The built-in webserver provides convenient browser-based configuration for resolution, IP, and notifications. Its mechanical compatibility with existing fieldbus encoders ensures stable, coupling-free performance.
Replacement model image below.
Dane techniczne
| Kategoria specyfikacji | Parametr | Szczegóły |
|---|---|---|
| Specyfikacje ogólne | Typ wykrywania | próbkowanie fotoelektryczne |
| Device type | Multiturn absolute encoder | |
| UL File Number | E223176 "For use in NFPA 79 Applications only", fUL marking is marked on the product. | |
| Parametry związane z bezpieczeństwem funkcjonalnym | MTTFd | 120 a |
| Mission Time (Tm) | 20 a | |
| Load | EN 611 at 6000 rpm and 20/40 N axial/radial shaft load | |
| Zakres diagnostyczny (DC) | 0 % | |
| Specyfikacje elektryczne | Operating voltage Uₐ | 10 ... 30 V DC |
| Power consumption P₀ | max. 4 W | |
| Linearity | ± 0.5 LSB (12 Bit) | |
| Output code | binary code | |
| Code course (counting direction) | cw ascending (clockwise rotation, code course ascending)ccw descending (clockwise rotation, code course descending) | |
| Interface | Interface type | PROFINET IO |
| Resolution | Single turn: up to 16 BitMultiturn: 14 BitOverall resolution: up to 30 Bit | |
| Physical | Ethernet | |
| Transfer rate | 100 MBit/s | |
| Cycle time (RT) | > 1 ms, ≤ 10 ms (RT) | |
| Połączenie | Connector | Ethernet: 2 sockets M12 1,4-pin, D-codedSupply: 1 plug M12 1,4-pin, A-coded |
| Zgodność z normami | Stopień ochrony | DIN EN 60529:- shaft side: IP64 (without shaft seal)/IP66 (with shaft seal)- housing: IP65- Stainless steel version (inox): completely IP67 |
| Testy klimatyczne | EN 60068-2-3: no moisture condensation | |
| Odporność na wstrząsy | EN 60068-2-27: 100 g, 6 ms | |
| Odporność na wibracje | EN 60068-2-6: 10 g ... 2000 Hz |
Warunki otoczenia
| Parametr | Szczegóły |
|---|---|
| Temperatura pracy | -40 … 85 °C (-40 … 185 °F) |
| Temperatura przechowywania | -40 … 85 °C (-40 … 185 °F) |
Specyfikacje mechaniczne
| Parametr | Szczegóły |
|---|---|
| Materiał | Standard version:housing: powder coated aluminumflange: aluminumshaft: stainless steelCombination 1:housing: powder coated aluminumflange: aluminumshaft: stainless steelCombination 2 (inox):housing: stainless steel 1.4305 / AISI 303flange: stainless steel 1.4301 / AISI 304shaft: stainless steel 1.4305 / AISI 303 |
| Masa | approx. 910 g (combination 1)approx. 1200 g (combination 2) |
| Prędkość obrotowa | maks. 6000 min-¹ |
| Moment bezwładności | 30 gcm² |
| Rozruchowy moment obrotowy | 30 mNmmax. 3 Nm (version without shaft seal) |
| Tightening torque, fastening screws | max. 1.18 Nm |
| Shaft offset | Axial offset: ± 0.9 °Radial offset: - static: ± 0.3 mm, dynamic: ± 0.1 mm - static: ± 0.5 mm, dynamic: ± 0.2 mm |
| Obciążenie wału | Axial: 20 NRadial: 40 N |
| Wymiary | Diameter: 59 mm |
Approvals and Certificates
| Certification | Szczegóły |
|---|---|
| Zatwierdzenie UL | Źródło zasilania klasy 2, ogólnego przeznaczenia, zgodne z normą cULus |
