The ASM58N-F1AK1AHBN-1213 multiturn absolute encoder can be provided as a 1:1 customized replacement with a standard lead time of 10 working days. Each unit is carefully designed to match the original model’s electrical interface, mechanical dimensions, and SSI communication format, ensuring an easy drop-in installation with no programming or wiring changes required. This makes it an ideal option for equipment maintenance or OEM system upgrades.
This encoder uses a 30-bit multiturn architecture to deliver extremely accurate position data. The optically isolated RS422 SSI interface ensures strong signal integrity and reliable transmission even in high-noise environments. Built with a recessed hollow shaft and torque rest mounting, it guarantees precise alignment and vibration resistance. The hardware-based design also means immediate data response without microcontroller delay—perfect for high-speed control systems.
Replacement solution image.
Technical data
| Parameter | Value |
|---|---|
| General specifications | |
| Detection type | photoelectric sampling |
| Device type | Multiturn absolute encoder |
| Electrical specifications | |
| Operating voltage | 4.5 ... 30 V DC |
| No-load supply current | max. 180 mA |
| Time delay before availability | < 250 ms |
| Linearity | ± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0.5 LSB at 12 Bit |
| Output code | Gray code, Binary code |
| Code course (counting direction) | cw descending (clockwise rotation, code course descending) |
| Interface | |
| Interface type | SSI |
| Monoflop time | 20 ± 10 μs |
| Resolution | - Single turn: up to 16 Bit- Multiturn: 14 Bit- Overall resolution: up to 30 Bit |
| Transfer rate | 0.1 ... 2 MB/s |
| Voltage drop | V |
| Standard conformity | RS 422 |
| Input 1 | |
| Input type | Selection of counting direction (cw/ccw) |
| Signal voltage | - High: 4.5 ... 30 V- Low: 0 ... 2 V |
| Input current | < 8 mA |
| Switch-on delay | < 10 ms |
| Connection | |
| Connector | type 9416 (M23), 12-pin, type 9416L (M23), 12-pin |
| Cable | 67 mm, 8 × 2.0 × 0.14 mm², 1 m |
| Standard conformity | |
| Degree of protection | DIN EN 60529, IP65 (without shaft seal); DIN EN 60529, IP66/IP67 (with shaft seal) |
| Shock resistance | DIN EN 60068-2-27, 100 g, 6 ms |
