We provide a customized replacement for the EXAGN-DPC1B-1213-A-AL-01-66-00-FF-A-00 Profibus explosion-proof absolute encoder. Produced through non-standard customization, the replacement matches the original model’s application parameters and installation dimensions, allowing full interchangeability without any modifications to the existing system. The production lead time is approximately 15 working days, providing a fast solution for clients with urgent delivery requirements.
The EXAGN-DPC1B-1213-A-AL-01-66-00-FF-A-00 encoder offers high-resolution absolute positioning with a Profibus DPV2 interface. Its aluminum housing and stainless steel shaft provide mechanical strength and durability for demanding industrial environments. Certified for explosion-proof applications according to ATEX and IECEx standards, it operates reliably from –40 °C to +70 °C with IP64–IP68 protection, resistant to dust, water, vibration, and shock. The shaft supports axial loads up to 60 N and radial loads up to 80 N, making it ideal for oil & gas, chemical, mining, and offshore applications. The removable end cap allows easy configuration of device addresses, while integrated termination resistors ensure stable Profibus communication. This replacement guarantees precise absolute positioning and full compliance with safety standards.
Replacement product physical photograph.
Dados técnicos
Especificações elétricas
| Parâmetro | Detalhes |
|---|---|
| Code | Absolute - Binary |
| Interface | Profibus - DPDPV2 - DualityLine Driver according to RS 485；galvanically isolated by opto - couplers |
| Resolução | Max. 14 bit (16384 revolutionsMax. 16 bit (65536) steps per rev. |
| Device Addressing | Adjustable by rotary switches inthe connection cap |
| Transmission Rate | Max. 12 MBaud |
| Supply Voltage | 10 to 30 Vdc |
| Current Consumption | Max. 115 mA with 10 VdcMax. 50 mA with 30 Vdc |
| Power Consumption | Max. 2.5 watts |
| Step Frequency LSB | 800 kHz |
| Accuracy of Division | +/- ½ LSB (12 bit)+/- 2 LSB (16 bit) |
| Electrical Lifetime | > 10⁵ hours |
| Electrical Protection | Reverse polarity and over - voltage - peak protection |
| Noise Immunity | EN61000 - 6 - 2 |
| Emitted Interference | EN 61000 - 6 - 4 |
Mechanical Specifications
| Parâmetro | Detalhes |
|---|---|
| Material | Housing：Stainless SteelCap：Stainless SteelShaft：Stainless Steel |
| Peso | Stainless Steel: ~ 3100 gr (109.35 oz) |
| Bearing Life | > 1,9 x 10¹⁰ revolutions at rated load |
| Shaft Speed | 6,000 rpm (max.), IP 643,000 rpm at 25°C, IP 65/66/67/68 |
| Starting Torque | ≤ 0,01 Nm (max)≤ 0,03 Nm at 25°C (with seal) |
| Rotor Mass Moment of Inertia | 42 g·cm² (5,95 x 10⁻⁴ oz-in-sec²) |
| Shaft Loads | Axial：60 N (13,50 lbs) max.Radial：80 N (17,98 lbs) max. |
Environmental Specifications
| Parâmetro | Detalhes |
|---|---|
| Operating Temp. | -40° to +70°C |
| Storage Temp. | -40° to +70°C |
| Shock | 100g @ 11 ms |
| Vibration | 10g @ 10 - 2000 Hz |
| Bump | 10g @ 16 ms (1000 x 3 axis) |
| Humidity | 98% RH without condensation |
| Enclosure Rating | IP 64 / Nema 4 (approx.)IP 65 / Nema 5 (approx.)IP 66 / Nema 6 (approx.)IP 67 / Nema 6 (approx.)IP 68 (1 hour/1 meter) / Nema 6P (approx.) |
Certifications
| Certification | Detalhes |
|---|---|
| ATEX | Certificate No.：ITS09ATEX16925XContent：I M2 Ex db I Mb, -40℃≤Ta≤+70℃ |
| ATEX DEKRA | Certificate No.：BVS 18.ATEX E 059 XContent：I M2 Ex db I Mb -40℃<T.amb<+70℃ |
| IECEx | Certificate No.：IECEx ITS 10.0009XContent：Ex db I Mb, -40℃≤Ta≤+70℃ |
| IECEx TSA | Certificate No.：IECEx TSA 11.0008XContent：Ex db I Mb, -40℃≤Ta≤+70℃ |
| EAC | Certificate No.：HAHH10 «IICB» No. EA3C RU - EAC C - DK.AA87B.00266/19Content：PB Ex db I Mb X -40℃<T.amb<+70℃ |
