30-3601_A-4000 Incremental Encoder Custom Replacement Model
Solução de substituição personalizada
We offer a custom replacement solution for the 30-3601_A-4000 encoder with options for non-standard shaft design, flange type, and electrical output. Manufactured efficiently in-house, these units can be delivered within approximately 10 working days, allowing clients to maintain continuous production without delays.
Análise do produto
The 30-3601_A-4000 incremental encoder delivers 4000 PPR output for precise motion control in industrial machinery. Its steel housing and reinforced shaft handle radial and axial loads effectively, while IP65 protection ensures reliable operation in dusty or wet environments. This encoder is ideal for packaging systems, conveyor lines, and automated manufacturing processes.
Dados técnicos
| Specification Category | Parâmetro | Detalhes |
|---|---|---|
| Especificações gerais | Pulse count | max. 5000 |
| Especificações elétricas | Operating voltage (UG) | 10 … 30 V DC |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Categoria | Parâmetro | Detalhes |
|---|---|---|
| Conexão | Connector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Conformidade com os padrões | Grau de proteção | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Ambient Conditions
| Parâmetro | Detalhes |
|---|---|
| Temperatura operacional | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Temperatura de armazenamento | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
Mechanical Specifications
| Parâmetro | Detalhes |
|---|---|
| Material | Combination 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Massa | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Velocidade de rotação | máx. 6000 min-¹ |
| Momento de inércia | < 270 g·m² |
| Torque inicial | ≤ 5 N·cm |
| Shaft load | Axial: 60 NRadial: 80 N |
