30-3601_A-400 Incremental Encoder Custom Replacement Model
Solução de substituição personalizada
Our custom replacement solution for the 30-3601_A-400 encoder includes non-standard options for shaft length, flange type, and signal output configurations. Produced in-house with high precision, these units are available within approximately 10 working days. This rapid turnaround provides a reliable replacement that preserves original performance while accommodating specific application requirements, ensuring smooth operation in automated industrial processes.
Análise do produto
The 30-3601_A-400 incremental encoder delivers 400 PPR output for accurate incremental feedback in automation systems. Its steel housing and reinforced shaft resist radial and axial loads, and the IP65-rated enclosure protects against dust, moisture, and vibration. This encoder is ideal for conveyor belts, packaging lines, and industrial machinery, providing consistent and precise incremental signals for efficient operation.
Dados técnicos
| Specification Category | Parâmetro | Detalhes |
|---|---|---|
| Especificações gerais | Pulse count | max. 5000 |
| Especificações elétricas | Operating voltage (UG) | 10 … 30 V DC |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Categoria | Parâmetro | Detalhes |
|---|---|---|
| Conexão | Connector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Conformidade com os padrões | Grau de proteção | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Ambient Conditions
| Parâmetro | Detalhes |
|---|---|
| Temperatura operacional | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Temperatura de armazenamento | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
Mechanical Specifications
| Parâmetro | Detalhes |
|---|---|
| Material | Combination 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Massa | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Velocidade de rotação | máx. 6000 min-¹ |
| Momento de inércia | < 270 g·m² |
| Torque inicial | ≤ 5 N·cm |
| Shaft load | Axial: 60 NRadial: 80 N |
