30-3601IA-5000 Incremental Encoder Custom Replacement Model
Solução de substituição personalizada
Our custom replacement units for the 30-3601IA-5000 encoder provide non-standard options in shaft design, flange type, and signal output configuration. Produced in-house with high precision, these encoders are delivered within approximately 10 working days, ensuring fast and reliable replacement. This allows industrial systems to maintain uninterrupted operation while adapting to unique application requirements.
Análise do produto
The 30-3601IA-5000 incremental encoder features 5000 PPR output for extremely high-precision motion feedback. Its steel housing and reinforced shaft resist mechanical stress, while the IP65-rated enclosure protects against dust, water, and vibration. The encoder is suitable for robotics, automated packaging machinery, and industrial automation systems requiring top-level accuracy and reliability.
Dados técnicos
| Specification Category | Parâmetro | Detalhes |
|---|---|---|
| Especificações gerais | Pulse count | max. 5000 |
| Especificações elétricas | Operating voltage (UG) | 10 … 30 V DC |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Categoria | Parâmetro | Detalhes |
|---|---|---|
| Conexão | Connector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Conformidade com os padrões | Grau de proteção | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Ambient Conditions
| Parâmetro | Detalhes |
|---|---|
| Temperatura operacional | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Temperatura de armazenamento | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
Mechanical Specifications
| Parâmetro | Detalhes |
|---|---|
| Material | Combination 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Massa | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Velocidade de rotação | máx. 6000 min-¹ |
| Momento de inércia | < 270 g·m² |
| Torque inicial | ≤ 5 N·cm |
| Shaft load | Axial: 60 NRadial: 80 N |
