The 862007954-1024 811336-01 is a high-performance incremental encoder designed for demanding industrial environments where accurate and reliable motion feedback is critical. A fully compatible replacement solution is available, matching the original hollow shaft dimensions, mechanical interfaces, and electrical output specifications. Standard delivery time is 10 working days, allowing efficient maintenance, equipment upgrades, or system retrofits with minimal downtime.
This encoder features a durable metal housing and blind hollow shaft, providing excellent resistance to vibration, shock, and harsh environmental conditions. With a resolution of 1024 pulses per revolution, it delivers precise speed and position feedback for motors and automated motion control systems. The encoder supports multiple output formats, including HTL, TTL, and HCHTL, ensuring broad compatibility with industrial drives, PLCs, and control units. Its IP67-rated enclosure and wide operating temperature range make it suitable for heavy industrial applications such as steel mills, cranes, wind turbines, and paper production lines. The rugged design guarantees long-term operational stability even under exposure to dust, moisture, or temperature fluctuations, making it a reliable choice for continuous and critical industrial processes.
Imagem da solução de substituição
I. Technical data
| Parâmetro | Detalhes |
|---|---|
| Temperatura operacional | -40 °C ... +85 °C |
| Classe de proteção contra ingresso [IEC 60529] | IP67 (IP65 at shaft inlet) |
| Choque [IEC 60068-2-27] | ≤ 1500 m/s² |
| Material da capa | Aluminium (coated) |
| Peso | 1300 g |
| Shaft load (axial/rradial) | 100 N / 300 N |
| Velocidade máxima de rotação | 6000 rpm |
| Material do eixo | Stainless steel with insulated hybrid bearings |
| Short circuit protected | Sim |
| Protegido contra polaridade | Sim |
| Consumo atual | 60 mA at 24 Vdc (Max 80 mA) |
| Output load | ≤ 40 mA |
| Output frequency max | 200 kHz |
| Cable length max | 350 m at 100 kHz |
| Number of channels | 90° el ± 2.5° el |
| Dividing error | ±50" el |
II. Encoder configuration
| Parâmetro | Detalhes |
|---|---|
| Code key description | 86E00795/4 |
| Tipo | XH |
| Modelo | 862 |
| Tipo de eixo | Ø12 mm blind hollow shaft |
| Tipo de flange | 865-flange |
| Resolução | 1024 |
| Fonte de alimentação | 9-30 Vdc |
| Output signal | HT - HTL |
| Tipo de conexão | Cabo |
| Direção de conexão | Radial |
| Comprimento do cabo | 6.00 m |
| Cable gland dimension | M20 for Ø8 - 11 mm cables |
| Number of channels | 3 |
| Advanced Diagnostic System | Available upon request |
| Overvoltage protection | Available upon request |
| Torque bracket | Available upon request |
