A complete 1:1 replacement for the ASM58N-F3AK1RHGN-1213 multiturn encoder is available with a 10-day lead time. This version maintains exact compatibility with the original device, including its 58 mm housing, hollow shaft, and SSI output configuration. It is designed for users seeking reliable feedback performance with minimal commissioning time in automation, drive systems, and industrial robotics.
Using advanced 30-bit multiturn encoding technology, the replacement delivers precise absolute position feedback over extended rotations. Its optically isolated RS422 interface provides stable data transmission even in environments with electromagnetic interference. With a rugged housing and direct shaft mounting, it offers long-term durability and high resistance to vibration. The hardware encoder architecture ensures immediate synchronization with control signals, optimizing response time and accuracy.
Replacement solution image.
Technical data
| Parameter | Value |
|---|---|
| General specifications | |
| Detection type | photoelectric sampling |
| Device type | Multiturn absolute encoder |
| Electrical specifications | |
| Operating voltage | 4.5 ... 30 V DC |
| No-load supply current | max. 180 mA |
| Time delay before availability | < 250 ms |
| Linearity | ± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0.5 LSB at 12 Bit |
| Output code | Gray code, Binary code |
| Code course (counting direction) | cw descending (clockwise rotation, code course descending) |
| Interface | |
| Interface type | SSI |
| Monoflop time | 20 ± 10 μs |
| Resolution | - Single turn: up to 16 Bit- Multiturn: 14 Bit- Overall resolution: up to 30 Bit |
| Transfer rate | 0.1 ... 2 MB/s |
| Voltage drop | V |
| Standard conformity | RS 422 |
| Input 1 | |
| Input type | Selection of counting direction (cw/ccw) |
| Signal voltage | - High: 4.5 ... 30 V- Low: 0 ... 2 V |
| Input current | < 8 mA |
| Switch-on delay | < 10 ms |
| Connection | |
| Connector | type 9416 (M23), 12-pin, type 9416L (M23), 12-pin |
| Cable | 67 mm, 8 × 2.0 × 0.14 mm², 1 m |
| Standard conformity | |
| Degree of protection | DIN EN 60529, IP65 (without shaft seal); DIN EN 60529, IP66/IP67 (with shaft seal) |
| Shock resistance | DIN EN 60068-2-27, 100 g, 6 ms |
