X700.M141402 Discontinued Encoder Custom Replacement Solution
The X700.M141402 is a discontinued encoder model, and we offer a fully customized non-standard replacement solution. Our 1:1 custom design ensures that all mechanical dimensions, electrical interfaces, and mounting features match the original precisely, allowing seamless integration into existing systems without any modifications. With a production cycle of 10–15 working days, we provide rapid delivery to minimize downtime, avoiding delays caused by the unavailability of the original discontinued components. This solution offers a reliable and cost-effective alternative for operators who need continuous operation and high performance, even when the original model is no longer produced.
The X700.M141402 replacement encoder is a high-performance SSI absolute encoder with multiturn capability and optical sensing technology. It delivers precise position feedback with singleturn and multiturn resolutions suitable for wind turbine control systems, industrial automation, and heavy-duty machinery. The encoder features a clamping flange for secure mounting, electronic zero-point adjustment for simplified calibration, and a direction input for flexible integration. Optional incremental outputs are available for enhanced functionality in complex control systems. Its robust construction ensures maximum resistance against magnetic interference, making it ideal for challenging environments such as turbine nacelles, generator housings, and industrial equipment exposed to electromagnetic noise.
Technical Data for X 700 - SSI - Multiturn Encoder
Technical data - electrical ratings
| Параметр | Значения |
|---|---|
| Напряжение питания | 10...30 VDC5 VDC ±10 % |
| Защита от обратной полярности | Yes |
| Потребление без нагрузки | ≤50 mA (24 VDC) |
| Время инициализации тип. | 20 мс после включения питания |
| Интерфейс | SSI |
| Функция | Многооборотные |
| Шаги на оборот | 16384 / 14 bit |
| Количество оборотов | 4096 / 12 bit |
| Абсолютная точность | ±0.025 ° |
| Метод зондирования | Оптический |
| Код | Серый или двоичный |
| Последовательность кодов | Кодирование CW/CCW по соединению |
| Входы | SSI clockControl signals UP/DOWN inv. and zero |
| Выходные каскады | SSI data: Linedriver RS422Diagnostic outputs push-pull |
| Помехоустойчивость | EN 61000-6-2 |
| Излучаемые помехи | EN 61000-6-4 |
| Диагностическая функция | Self-diagnosisMultiturn sensing |
Technical data - mechanical design
| Параметр | Значения |
|---|---|
| Размер (фланец) | ø70 mm |
| Тип вала | ø10 mm solid shaft (clamping flange) |
| Фланец | Зажимной фланец |
| Защита EN 60529 | IP 67 |
| Рабочая скорость | ≤6000 rpm (mechanical)≤6000 rpm (electric) |
| Starting acceleration | ≤1000 U/s² |
| Пусковой момент | ≤0.4 Nm (+25 °C) |
| Допустимая нагрузка на вал | ≤60 N axial≤50 N radial |
| Материал | Housing: stainless steelFlange: stainless steel |
| Рабочая температура | -20...+70 °C |
| Относительная влажность | 95 % без конденсации |
| Сопротивление | EN 60068-2-6Vibration ±0.75 mm - 10-58 Hz, 10 g - 58-2000 HzEN 60068-2-27Shock 200 g, 6 ms |
| Explosion protection | Ex II 2G Ex d IIC T6Ex II 2D |
| Вес ок. | 1300 g |
| Соединение | Cable |
