30-3601_A-400 Incremental Encoder Custom Replacement Model
Custom Replacement Solution
Our custom replacement solution for the 30-3601_A-400 encoder includes non-standard options for shaft length, flange type, and signal output configurations. Produced in-house with high precision, these units are available within approximately 10 working days. This rapid turnaround provides a reliable replacement that preserves original performance while accommodating specific application requirements, ensuring smooth operation in automated industrial processes.
Product Review
The 30-3601_A-400 incremental encoder delivers 400 PPR output for accurate incremental feedback in automation systems. Its steel housing and reinforced shaft resist radial and axial loads, and the IP65-rated enclosure protects against dust, moisture, and vibration. This encoder is ideal for conveyor belts, packaging lines, and industrial machinery, providing consistent and precise incremental signals for efficient operation.
Teknik Veriler
| Specification Category | Parametre | Detaylar |
|---|---|---|
| General specifications | Pulse count | max. 5000 |
| Electrical specifications | Operating voltage (UG) | 10 … 30 V DC |
| No-load supply current (I0) | max. 80 mA | |
| Output | Output type | push-pull, incremental |
| Voltage drop (UU) | < 4 V | |
| Load current | max. per channel 40 mA, short-circuit protected, reverse polarity protected | |
| Output frequency | max. 100 kHz | |
| Rise time | 250 ns | |
| De-energized delay (tuj) | 250 ns |
Connection & Conformity
| Category | Parametre | Detaylar |
|---|---|---|
| Connection | Connector | type 9416 (M23), 12-pin |
| Cable | ∅6 mm, 4 × 2 × 0.14 mm², 2 m | |
| Standard conformity | Degree of protection | DIN EN 60529, IP65 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Ambient Conditions
| Parametre | Detaylar |
|---|---|
| Operating temperature | Glass disk: -20 … 70 °C (-4 … 158 °F)Plastic disk: -20 … 60 °C (-4 … 140 °F) |
| Storage temperature | Glass disk: -40 … 70 °C (-40 … 158 °F)Plastic disk: -40 … 60 °C (-40 … 140 °F) |
Mechanical Specifications
| Parametre | Detaylar |
|---|---|
| Material | Combination 1:housing: stainless steel 1.4301 / AISI 304flange: stainless steelshaft: stainless steel 1.4305 / AISI 303Combination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Mass | approx. 1250 g (combination 1)approx. 2200 g (combination 2) |
| Rotational speed | max. 6000 min⁻¹ |
| Moment of inertia | < 270 g·m² |
| Starting torque | ≤ 5 N·cm |
| Shaft load | Axial: 60 NRadial: 80 N |
