ESM58W-F3APNR0BN-1213 ProfiNet Encoder Custom Replacement Solution
Custom Replacement Solution
Our company offers a custom replacement for the ESM58W-F3APNR0BN-1213 encoder, ensuring precise matching of the original’s installation dimensions and performance. Production lead time is around 10 working days. These replacement encoders have been positively received in South America, Southeast Asia, the Middle East, and Russia, reflecting their high reliability and suitability for diverse industrial environments.
Product Review
The ESM58W-F3APNR0BN-1213 is a 30-bit absolute multiturn encoder featuring a Ø58 mm housing and recessed hollow shaft. PROFINET IRT support and the integrated 2-port switch enable network loop-through. Operation modes include polled, cyclic, and change-of-state. The built-in webserver allows convenient configuration of resolution, IP address, and email notifications. Its mechanical design ensures compatibility with major fieldbus encoders while providing stable operation without couplings.
Replacement model image below.
Teknik Veriler
| Specification Category | Parametre | Detaylar |
|---|---|---|
| General specifications | Detection type | photoelectric sampling |
| Device type | Multiturn absolute encoder | |
| UL File Number | E223176 "For use in NFPA 79 Applications only", fUL marking is marked on the product. | |
| Functional safety related parameters | MTTFd | 120 a |
| Mission Time (Tm) | 20 a | |
| Load | EN 611 at 6000 rpm and 20/40 N axial/radial shaft load | |
| Diagnostic Coverage (DC) | 0 % | |
| Electrical specifications | Operating voltage Uₐ | 10 … 30 V DC |
| Power consumption P₀ | max. 4 W | |
| Linearity | ± 0.5 LSB (12 Bit) | |
| Output code | binary code | |
| Code course (counting direction) | cw ascending (clockwise rotation, code course ascending)ccw descending (clockwise rotation, code course descending) | |
| Interface | Interface type | PROFINET IO |
| Resolution | Single turn: up to 16 BitMultiturn: 14 BitOverall resolution: up to 30 Bit | |
| Physical | Ethernet | |
| Transfer rate | 100 MBit/s | |
| Cycle time (RT) | > 1 ms, ≤ 10 ms (RT) | |
| Connection | Connector | Ethernet: 2 sockets M12 1,4-pin, D-codedSupply: 1 plug M12 1,4-pin, A-coded |
| Standard conformity | Degree of protection | DIN EN 60529:- shaft side: IP64 (without shaft seal)/IP66 (with shaft seal)- housing: IP65- Stainless steel version (inox): completely IP67 |
| Climatic testing | EN 60068-2-3: no moisture condensation | |
| Shock resistance | EN 60068-2-27: 100 g, 6 ms | |
| Vibration resistance | EN 60068-2-6: 10 g ... 2000 Hz |
Ambient Conditions
| Parametre | Detaylar |
|---|---|
| Operating temperature | -40 … 85 °C (-40 … 185 °F) |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
Mechanical Specifications
| Parametre | Detaylar |
|---|---|
| Material | Standard version:housing: powder coated aluminumflange: aluminumshaft: stainless steelCombination 1:housing: powder coated aluminumflange: aluminumshaft: stainless steelCombination 2 (inox):housing: stainless steel 1.4305 / AISI 303flange: stainless steel 1.4301 / AISI 304shaft: stainless steel 1.4305 / AISI 303 |
| Mass | approx. 910 g (combination 1)approx. 1200 g (combination 2) |
| Rotational speed | max. 6000 min⁻¹ |
| Moment of inertia | 30 gcm² |
| Starting torque | 30 mNmmax. 3 Nm (version without shaft seal) |
| Tightening torque, fastening screws | max. 1.18 Nm |
| Shaft offset | Axial offset: ± 0.9 °Radial offset: - static: ± 0.3 mm, dynamic: ± 0.1 mm - static: ± 0.5 mm, dynamic: ± 0.2 mm |
| Shaft load | Axial: 20 NRadial: 40 N |
| Dimensions | Diameter: 59 mm |
Approvals and Certificates
| Certification | Detaylar |
|---|---|
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
