PSM58W-F2AAGR0BN-1416 Profibus Multiturn Absolute Encoder Custom Replacement
Custom Replacement Solution
We provide the PSM58W-F2AAGR0BN-1416 as a custom replacement encoder, fully matching the original device’s mechanical and electrical parameters. Production time is about 10 working days, allowing fast delivery and continuity in industrial operations. The encoder has been successfully used in international markets such as South America, Southeast Asia, the Middle East, and Russia, demonstrating its dependability.
Product Review
Equipped with a 30-bit multiturn system, this Profibus absolute encoder delivers accurate absolute position feedback. Both Class 1 and Class 2 operations are supported, with extended functionalities including speed transfer, programmable limit switches, extended scaling, and commissioning mode. The recessed hollow shaft with torque rest guarantees secure and stable installation.
Replacement model image below.
Teknik Veriler
| Specification Category | Parametre | Detaylar |
|---|---|---|
| General specifications | Detection type | photoelectric sampling |
| Device type | Multiturn absolute rotary encoder | |
| Electrical specifications | Operating voltage (UB) | 10 … 30 V DC |
| No-load supply current (I0) | max. 230 mA at 10 V DCmax. 100 mA at 24 V DC | |
| Power consumption (PN) | max. 2.5 W | |
| Time delay before availability (tv) | < 1000 ms | |
| Linearity | ± 2 LSB (16 Bit)± 1 LSB (13 or 12 Bit) | |
| Output code | binary code | |
| Code course (counting direction) | programmable:- clockwise rotation, code course ascending- clockwise rotation, code course descending | |
| Interface | Interface type | PROFIBUS profile: HSB-448 |
| Resolution | Single turn: up to 16 BitMultiturn: 14 BitOverall resolution: up to 30 Bit | |
| Transfer rate | 0.030…12.0 MBit/s | |
| Connection | in movable housing, using cover | |
| Standard conformity | Degree of protection | DIN EN 60529: IP65IP65 (with minimum shaft seal) |
| Climatic testing | DIN EN 60068-3-5, no moisture condensation | |
| Emitted interference | EN 61000-6-4:2007 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Shock resistance | DIN EN 60068-2-27: 100 g, 6 ms | |
| Vibration resistance | DIN EN 60068-2-6: 10 g ... 2000 Hz |
Ambient Conditions
| Parametre | Detaylar |
|---|---|
| Operating temperature | -40 … 85 °C (-40 … 185 °F) |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
Mechanical Specifications
| Parametre | Detaylar |
|---|---|
| Material | Combination 1:housing: powder coated aluminiumflange: stainless steelshaft: stainless steelCombination 2 (inox):housing: stainless steelflange: stainless steelshaft: stainless steel |
| Mass | approx. 600 g (combination 1)approx. 1200 g (combination 2) |
| Rotational speed | max. 12000 min⁻¹ |
| Moment of inertia | 30 g·cm² |
| Starting torque | ≤ 3 N·cm (version without shaft seal) |
| Tightening torque, fastening screws | max. 1.18 Nm |
| Shaft offset | Axial offset: ± 0.9°Radial offset:- static: ± 0.3 mm, dynamic: ± 0.1 mm- static: ± 0.5 mm, dynamic: ± 0.2 mm |
| Dimensions | Length: 98 mmDiameter: 65 mm |
Approvals and Certificates
| Certification | Detaylar |
|---|---|
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
